I am test fitting these screens but they are too big and rest on top the square bolts. Am I supposed to trim the screen to fit or let it rest on the bolts?
Brian's 2017 NO. 10 LATE TIGER 1 BUILD
-
Brian Ostlind
- Posts: 1466
- Joined: Sat Oct 28, 2017 6:56 am
- Location: Oregon, USA
- Has liked: 975 times
- Been liked: 2068 times
Re: Brian's 2017 NO. 10 LATE TIGER 1 BUILD
Does this look right?
I am test fitting these screens but they are too big and rest on top the square bolts. Am I supposed to trim the screen to fit or let it rest on the bolts?
I am test fitting these screens but they are too big and rest on top the square bolts. Am I supposed to trim the screen to fit or let it rest on the bolts?
-
Vince Cutajar
- Posts: 2193
- Joined: Wed Nov 15, 2017 1:43 pm
- Location: Malta
- Has liked: 792 times
- Been liked: 1761 times
Re: Brian's 2017 NO. 10 LATE TIGER 1 BUILD
Maybe you need to bend the edges a bit more. Just a thought.
Vince
Vince
-
David Stewart
- Posts: 37
- Joined: Sat Apr 01, 2017 5:49 pm
- Location: Northamptonshire
- Has liked: 3 times
- Been liked: 11 times
Re: Brian's 2017 NO. 10 LATE TIGER 1 BUILD
Hi Brian
When I fitted them on my intake grills I folded them down so they fitted past the bolts, this required a little bit of trimming.
What I think your supposed to do is fold them 90 degrees so the mesh sits atop of the intake, that way it also give you clearance to fit the finer mesh if so desired.
David
When I fitted them on my intake grills I folded them down so they fitted past the bolts, this required a little bit of trimming.
What I think your supposed to do is fold them 90 degrees so the mesh sits atop of the intake, that way it also give you clearance to fit the finer mesh if so desired.
David
Armortek 2010 Mid Tiger 1
-
Tom OBrien
- Posts: 145
- Joined: Wed Nov 07, 2018 8:49 pm
- Has liked: 5 times
- Been liked: 67 times
Re: Brian's 2017 NO. 10 LATE TIGER 1 BUILD
I couldn't figure out how the crews fit the screens onto the grills, so I imagined how I would do it in the field.
I simply welded the mesh to the grills so that it held the screen securely. Crude, but effective, I guess.
I simply welded the mesh to the grills so that it held the screen securely. Crude, but effective, I guess.
- I suppose the mesh got bashed about regularly in the field, trod on and such, and occasionally replaced or repaired.
-
simon_manning
- Posts: 2061
- Joined: Fri Nov 02, 2007 8:51 pm
- Location: new forest,hampshire,u.k.
- Been liked: 1767 times
Re: Brian's 2017 NO. 10 LATE TIGER 1 BUILD
trim to fit, and hold on with thin wire loops around both the mesh and the grill, not pulled to tightly, some small weld points all around the edge of the mesh, kent wiik has posted on this subject before, i am not sure if this is a factory fitting or a field mod but there are photo's on this subject here on the forum, regards simon.
-
Brian Ostlind
- Posts: 1466
- Joined: Sat Oct 28, 2017 6:56 am
- Location: Oregon, USA
- Has liked: 975 times
- Been liked: 2068 times
Re: Brian's 2017 NO. 10 LATE TIGER 1 BUILD
It’s running more or less perfect at the moment. The only thing I hate is one sides tracks look too tight. It really thrashes and tears it up now! I’ll regroup and put the rest together now.
[youtube][/youtube]
[youtube][/youtube]
-
Brian Ostlind
- Posts: 1466
- Joined: Sat Oct 28, 2017 6:56 am
- Location: Oregon, USA
- Has liked: 975 times
- Been liked: 2068 times
-
Brian Ostlind
- Posts: 1466
- Joined: Sat Oct 28, 2017 6:56 am
- Location: Oregon, USA
- Has liked: 975 times
- Been liked: 2068 times
-
Vince Cutajar
- Posts: 2193
- Joined: Wed Nov 15, 2017 1:43 pm
- Location: Malta
- Has liked: 792 times
- Been liked: 1761 times
-
Brian Ostlind
- Posts: 1466
- Joined: Sat Oct 28, 2017 6:56 am
- Location: Oregon, USA
- Has liked: 975 times
- Been liked: 2068 times
-
Brian Ostlind
- Posts: 1466
- Joined: Sat Oct 28, 2017 6:56 am
- Location: Oregon, USA
- Has liked: 975 times
- Been liked: 2068 times
-
Brian Ostlind
- Posts: 1466
- Joined: Sat Oct 28, 2017 6:56 am
- Location: Oregon, USA
- Has liked: 975 times
- Been liked: 2068 times
-
Brian Ostlind
- Posts: 1466
- Joined: Sat Oct 28, 2017 6:56 am
- Location: Oregon, USA
- Has liked: 975 times
- Been liked: 2068 times
-
Brian Ostlind
- Posts: 1466
- Joined: Sat Oct 28, 2017 6:56 am
- Location: Oregon, USA
- Has liked: 975 times
- Been liked: 2068 times
-
Glen Clark
- Posts: 212
- Joined: Thu Nov 09, 2017 12:08 pm
- Has liked: 19 times
- Been liked: 160 times