Martin's Panzer IV
- Martin Hofmann
- Posts: 470
- Joined: Tue Jan 06, 2015 4:20 pm
- Location: Hamburg, Germany
- Has liked: 148 times
- Been liked: 1827 times
Re: Martin's Panzer IV
Now comes a small update with the new front cover of the turret, the ventilation parts of the motor compartment and the back plate with welding lines.
Regards Martin
-
- Posts: 465
- Joined: Sun Nov 03, 2019 3:46 pm
- Has liked: 1000 times
- Been liked: 884 times
Re: Martin's Panzer IV
Thank you for sharing your excellent work Martin.
Best wishes from Sweden
Robert
Best wishes from Sweden
Robert
-
- Posts: 221
- Joined: Wed Feb 13, 2013 7:57 pm
- Location: Cologne Area, Germany
- Has liked: 2 times
- Been liked: 59 times
Re: Martin's Panzer IV
Wie immer ein absoluter Augenschmaus, einfach geniale Arbeit
Gruss vom Uwe
Gruss vom Uwe
1:16 Models: Kingtiger
1:10 Models: Flak-Panther Coelian, Panther A , S.WS with 3,7cm Flak 37
1:6 Armortek Models: Flak 36 2006, Kingtiger 2013, PAK 43/41 2015, SdKfz 251 2016, FAMO 2018
1:6 other Models: Opel Blitz , Kübelwagen , Zündapp KS750 etc...
1:10 Models: Flak-Panther Coelian, Panther A , S.WS with 3,7cm Flak 37
1:6 Armortek Models: Flak 36 2006, Kingtiger 2013, PAK 43/41 2015, SdKfz 251 2016, FAMO 2018
1:6 other Models: Opel Blitz , Kübelwagen , Zündapp KS750 etc...
-
- Posts: 106
- Joined: Fri Jun 17, 2022 10:49 pm
- Location: South Central Pennsylvania
- Has liked: 742 times
- Been liked: 61 times
- Martin Hofmann
- Posts: 470
- Joined: Tue Jan 06, 2015 4:20 pm
- Location: Hamburg, Germany
- Has liked: 148 times
- Been liked: 1827 times
Re: Martin's Panzer IV
Hi Robert, Uwe and Damon,
thank you so much for your nice words.
The next step is to start with the electric and the doors from the turret, but all not ready!
thank you so much for your nice words.
The next step is to start with the electric and the doors from the turret, but all not ready!
Regards Martin
- Martin Hofmann
- Posts: 470
- Joined: Tue Jan 06, 2015 4:20 pm
- Location: Hamburg, Germany
- Has liked: 148 times
- Been liked: 1827 times
Re: Martin's Panzer IV
Here are a small update with the electric installations and the first painted and weathered road wheels from the inner side of the tank.
Regards Martin
- Martin Hofmann
- Posts: 470
- Joined: Tue Jan 06, 2015 4:20 pm
- Location: Hamburg, Germany
- Has liked: 148 times
- Been liked: 1827 times
Re: Martin's Panzer IV
The next step was to glue the bearings into the wheels with Loctite 648 and the rubber rings with Loctite 480.
In the middle of the covers i made a sunk hole and glued in a self made grease nipple. They are made from a cap screw M1,6 with a glued ball of 1,5mm diameter into the head and covered with a washer, so you can see the ball from outside.
At the last fotos you can see the layer between the chipping layers before the yellow layer is painted.
In the middle of the covers i made a sunk hole and glued in a self made grease nipple. They are made from a cap screw M1,6 with a glued ball of 1,5mm diameter into the head and covered with a washer, so you can see the ball from outside.
At the last fotos you can see the layer between the chipping layers before the yellow layer is painted.
Regards Martin
- Adrian Harris
- Posts: 5060
- Joined: Thu Jul 12, 2007 10:46 pm
- Location: Berkshire (UK)
- Has liked: 1367 times
- Been liked: 1567 times
Re: Martin's Panzer IV
They look excellent. I didn't know you could even get 1.5mm ball bearings
Adrian.
Adrian.
Contact me at sales@armortekaddict.uk for details of my smoker fan control module
- Martin Hofmann
- Posts: 470
- Joined: Tue Jan 06, 2015 4:20 pm
- Location: Hamburg, Germany
- Has liked: 148 times
- Been liked: 1827 times
Re: Martin's Panzer IV
Hi Adrian,
thank you so much for the nice words. The balls in the cap screw head are only the balls with dia of 1,5mm and not the whole ball bearing
But for information : you also can buy bearings with an inner diameter of 1mm!!!!
thank you so much for the nice words. The balls in the cap screw head are only the balls with dia of 1,5mm and not the whole ball bearing
But for information : you also can buy bearings with an inner diameter of 1mm!!!!
Regards Martin
- Martin Hofmann
- Posts: 470
- Joined: Tue Jan 06, 2015 4:20 pm
- Location: Hamburg, Germany
- Has liked: 148 times
- Been liked: 1827 times
Re: Martin's Panzer IV
After the last chipping layer comes the paint of Dunkelgelb in two variations for the Afrikakorps. Then the chipping process is followed at the road wheels. The sprockets have to come next. Some wheels are only looking primed ( the red ones ), but have also the chipping underground. The wheels with the open bearing is only the spare one for placed at the side of the tank. Now the weathering has to be done.
Regards Martin
- Martin Hofmann
- Posts: 470
- Joined: Tue Jan 06, 2015 4:20 pm
- Location: Hamburg, Germany
- Has liked: 148 times
- Been liked: 1827 times
Re: Martin's Panzer IV
The weathering is done. So the road wheels are ready for mounting.
The idler wheels got the medium layer of the chipping process.
The idler wheels got the medium layer of the chipping process.
Regards Martin
- Martin Hofmann
- Posts: 470
- Joined: Tue Jan 06, 2015 4:20 pm
- Location: Hamburg, Germany
- Has liked: 148 times
- Been liked: 1827 times
Re: Martin's Panzer IV
The sprockets are also weathered and all the rubber rings are glued onto the road wheels. Here i had also simulated some fat coming out of the grease nipple a nd the bearings.
Regards Martin
-
- Posts: 2024
- Joined: Fri Nov 02, 2007 8:51 pm
- Location: new forest,hampshire,u.k.
- Been liked: 1633 times
-
- Posts: 1816
- Joined: Tue Dec 14, 2010 3:11 pm
- Location: IRELAND,Dublin/Meath
- Has liked: 5 times
- Been liked: 630 times
- Contact:
Re: Martin's Panzer IV
Are you using the latest brushless motion pack. I will need to add a motion pack to my Panzer IV soon. I need to get some work done on it.
love your details.
love your details.
If interested in any parts used in my builds contact me at johnfitzsimons@msn.com for a price list.
http://www.armortek.co.uk/Forum3b/viewt ... f=4&t=4770
https://youtube.com/@16rctankworkshop-y ... TlMwTalnX5
http://www.armortek.co.uk/Forum3b/viewt ... f=4&t=4770
https://youtube.com/@16rctankworkshop-y ... TlMwTalnX5
-
- Posts: 465
- Joined: Sun Nov 03, 2019 3:46 pm
- Has liked: 1000 times
- Been liked: 884 times
Re: Martin's Panzer IV
Beautiful work like in a jewelry shop.
I take my hat off for you Martin.
Ps. I am sad to say that i dont will go to Ooverloon this year.
I take my hat off for you Martin.
Ps. I am sad to say that i dont will go to Ooverloon this year.