Could anyone help me ...Not sure how to wire up an LED machine gun manufactured by Steve Winstone in order that it flashes when the appropriate sound is selected .If anyone can help with this it would be greatly appreciated.i believe Adrian Harris is the man who will be able to help.
hope someone can help
Rob Coomber
2025 ARMORTEK KIT SURVEY
Over the last few years we have brought out a whole series of kits as a direct result of your feedback - kits like the Pershing, JagdPanther, Hetzer, Leopard 2A4, and more recently the Sd Kfz 7, 88mm Flak 36 and the upcoming Challenger 2.
So, in keeping with what has become and annual tradition, here is your opportunity to once again influence our future production plans.
We have added in some "guide pricing" next to the names of the models. This is a rough estimate of the price at the current rates.
Thanks in advance for your input and we look forward to the results.
LED machine gun wiring on king tiger
-
Adrian Harris
- Posts: 5119
- Joined: Thu Jul 12, 2007 10:46 pm
- Location: Berkshire (UK)
- Has liked: 1475 times
- Been liked: 1674 times
Re: LED machine gun wiring on king tiger
Which amplifier module do you have ?
On the Mk1 Amplifier Module, it goes onto the which connector next to the volume control. The positive connection goes to the centre pin and the negative to the pin furthest from the volume control.
On the newer Mk2 Audio Module, I believe it goes onto LED output 4, with the negative at the top and the positive at the bottom.
I don't know if Steve sends them out with colour coded wires, but the negative connection on an LED goes to the side with the flat on the case, and it has the larger electrode inside the 'bulb'.
If you get it the wrong way round, you can't do any harm, as an LED just won't conduct if connected backwards.
Adrian.
On the Mk1 Amplifier Module, it goes onto the which connector next to the volume control. The positive connection goes to the centre pin and the negative to the pin furthest from the volume control.
On the newer Mk2 Audio Module, I believe it goes onto LED output 4, with the negative at the top and the positive at the bottom.
I don't know if Steve sends them out with colour coded wires, but the negative connection on an LED goes to the side with the flat on the case, and it has the larger electrode inside the 'bulb'.
If you get it the wrong way round, you can't do any harm, as an LED just won't conduct if connected backwards.
Adrian.
Contact me at sales@armortekaddict.uk for details of my smoker fan control module
-
Rob_Coomber
- Posts: 3
- Joined: Wed Apr 23, 2014 8:16 pm
Re: LED machine gun wiring on king tiger
Thank you so much for the info will be in touch if further assistance required.
regards, Rob
regards, Rob