speakers on the Easy 8

John Burden · Post by **John Burden** » Thu Oct 27, 2022 5:32 am

I have been playing around with the 2 speakers from the Audio Option pack for the E8. Not found the perfect location, yet I am leaning towards facing up below the engine grills.
What have others done?

Andy Walker · Post by **Andy Walker** » Thu Oct 27, 2022 2:52 pm

I've put mine under the engine grill but one each side of smoke unit facing inwards.

Erik Dries · Post by **Erik Dries** » Thu Oct 27, 2022 3:08 pm

this is what i have done

John Burden · Post by **John Burden** » Thu Oct 27, 2022 9:14 pm

Eric that's a pretty fancy setup you've done. Very nice

Antony Selwood · Post by **Antony Selwood** » Sun Oct 30, 2022 8:29 am

Very neat installation Eric, what type of board are those components mounted on? and how is it secured to the tank sides?

Erik Dries · Post by **Erik Dries** » Sun Oct 30, 2022 5:00 pm

Hi,

It is a 3d printed tray, The the speakers are mounted in a completely printed speakerbox, this is mounted over the smoker. The main tray exist of four levels, three below the one you can see, all the electronics are placed there. the front piece around the battery is just for the looks and to guide some wires to the front. For now it is secured by gravity and the bolt heads from the sponsoon mounting. It can not move from side to side because of the fit.
I made a small miscaculation with the space for the turret motor and had to remove material manually, as the print was about 7 days i did not wanto do it again. The print material is ABS.

John Clarke · Post by **John Clarke** » Sun Oct 30, 2022 10:59 pm

Brilliant. That's next level internal lay out

GlenStenhouse · Post by **GlenStenhouse** » Sun Oct 30, 2022 11:36 pm

No room for the smoke pack?

speakers on the Easy 8

speakers on the Easy 8

Re: speakers on the Easy 8

Re: speakers on the Easy 8

Re: speakers on the Easy 8

Re: speakers on the Easy 8

Re: speakers on the Easy 8

Re: speakers on the Easy 8

Re: speakers on the Easy 8