Suspension arm angle

Forum for discussion relating to the King Tiger
Post Reply
User avatar
Paul Sparkes
Posts: 126
Joined: Thu Mar 03, 2022 7:57 pm
Location: Dorset
Has liked: 60 times
Been liked: 150 times
Contact:
Contact Paul Sparkes

Suspension arm angle

Post by Paul Sparkes »

I’m chasing a few problems with the drive train on the Jagdtiger.

On inspection some of the torsion bar end were loose and the angle had changed.

The manual says set to 25 degrees, is the KT the same angle? I see some mention 35 degree. Is there any info to support the angle change or what works better.

Thanks
Jagdtiger 2020 number 40. With Gun Smoke, CO2 recoil and Driving on custom Brushless motors.

See my YouTube for video's https://www.youtube.com/@TheMinimivic/featured
Top
User avatar
Brian Ostlind
Posts: 1454
Joined: Sat Oct 28, 2017 6:56 am
Location: Oregon, USA
Has liked: 954 times
Been liked: 2024 times

Re: Suspension arm angle

Post by Brian Ostlind »

I did set up my king Tiger with a higher angle just to get the slack in the tracks out because I couldn’t tighten the idler far enough. That worked well for me.
Top
Michael Allen
Posts: 118
Joined: Sun Oct 09, 2022 3:53 pm
Location: Essex
Has liked: 993 times
Been liked: 79 times

Re: Suspension arm angle

Post by Michael Allen »

Brian

Given all your KT experience what angle would you now recommend. I’ve got to install mine soon and would appreciate your guidance. Many thanks

Mick
Top
User avatar
Brian Ostlind
Posts: 1454
Joined: Sat Oct 28, 2017 6:56 am
Location: Oregon, USA
Has liked: 954 times
Been liked: 2024 times

Re: Suspension arm angle

Post by Brian Ostlind »

Michael Allen wrote: ↑
Sat Mar 25, 2023 7:50 pm
 Brian

Given all your KT experience what angle would you now recommend. I’ve got to install mine soon and would appreciate your guidance. Many thanks

Mick
I was around 35 degrees but I never measured exactly.

Image
Top
Post Reply

Return to “King Tiger”