Thanks Steen,
now it is time to make all the welds. The cone head bolts in front are replaced by new nuts M4 from Knupfer ( with small key-with ) and reduced the high to approx. 3mm, so it looks near to the origin. Also added some hex. screws on the roof plate.
After some emails and a little waiting i got the beautiful bump stops parts from Michal Matata.
At this place again: many thanks for this parts. This is a high light to every StuG or PanzerIII. Here are the first impressions.
Hi Chris, Björn, Bob and Roy,
many thanks for your nice words, they are very welcome - sorry for not answer so long, but i am very busy at the moment.
Here is a very small update from the torsion bars and the fixed ends.