Martin's StuG 3

[Steen Vøler]

Hi Martin
That is really well made I looked at the picture again closely and this time I could see the simulation ::D

[Martin Hofmann]

Thanks Steen,
now it is time to make all the welds. The cone head bolts in front are replaced by new nuts M4 from Knupfer ( with small key-with ) and reduced the high to approx. 3mm, so it looks near to the origin. Also added some hex. screws on the roof plate.

[Martin Hofmann]

After some emails and a little waiting i got the beautiful bump stops parts from Michal Matata.
At this place again: many thanks for this parts. This is a high light to every StuG or PanzerIII. Here are the first impressions.

[David Brady]

Nice addition, I have ordered a set.

Cheers

[Björn Johansson]

Awesome details

[Martin Hofmann]

Thanks Björn,
A bit more progress on the side walls.

[florian rudolf]

Realy great build. Nice to watch this projct...

[Martin Hofmann]

Thanks Florian,
here are a small update for the gratings of the air inlet, the brackets for the gun cleaning rods and the steel tow cable brackets.

[Martin Hofmann]

After a long time here are the next steps for the covers on the bottom plate and the first mount of the side walls.

[Christoffer Ahlfors]

Stunning details!

[Björn Johansson]

A true master piece

[Robert E Morey]

Michaels detail parts really take the Stug III/PzIII to a new level. Really nice looking hull.
Best regards,
Bob

[Roy Beukeveld]

The work and detailing you put in this model is amazing, I’m impressed with your work. This model is going to be top notch

[Martin Hofmann]

Hi Chris, Björn, Bob and Roy,
many thanks for your nice words, they are very welcome - sorry for not answer so long, but i am very busy at the moment.
Here is a very small update from the torsion bars and the fixed ends.

[florian rudolf]

Realy nice build.
Another masterpice is growing up here.
Cheers
Florian