Depends what you mean by high stress environment.
Each drive motor has a fuse set at 30A. This is more then enough for neutral turns on longish grass or carrying a person around.
If you are planning on exceeding that then you will also need to up-rate all your wiring and the power supply box - and potentially your batteries as well if you are running with a BMS.
2025 ARMORTEK KIT SURVEY
Over the last few years we have brought out a whole series of kits as a direct result of your feedback - kits like the Pershing, JagdPanther, Hetzer, Leopard 2A4, and more recently the Sd Kfz 7, 88mm Flak 36 and the upcoming Challenger 2.
So, in keeping with what has become and annual tradition, here is your opportunity to once again influence our future production plans.
We have added in some "guide pricing" next to the names of the models. This is a rough estimate of the price at the current rates.
Thanks in advance for your input and we look forward to the results.
The ALL NEW Armortek drive system for tanks
- Armortek
- Site Admin
- Posts: 2931
- Joined: Tue Jul 10, 2007 10:30 am
- Location: Winchester, England
- Been liked: 3679 times
-
- Posts: 27
- Joined: Wed Mar 29, 2023 8:48 pm
- Location: Pennsylvania
- Has liked: 6 times
- Been liked: 54 times
Re: The ALL NEW Armortek drive system for tanks
I was thinking of using a 24v 20ah Lithium Battery on a Jagdtiger with your new Brush-less motor motion pack I am getting from you. Or does it need more then 20ah of power to last longer? Also what is the max volts that the new Brush-less motor motion pack can use?
- Adrian Harris
- Posts: 5119
- Joined: Thu Jul 12, 2007 10:46 pm
- Location: Berkshire (UK)
- Has liked: 1475 times
- Been liked: 1674 times
Re: The ALL NEW Armortek drive system for tanks
> Or does it need more then 20ah of power to last longer?
That's kind of a given
Space is not at a premium in the JT, I would probably go for 30Ah or 40Ah.
> Also what is the max volts that the new Brush-less motor motion pack can use?
BLDC motors are rated in KV, which is the number of revolutions per volt. Owning and driving a JT, and having been fortunate enough to drive a Tiger with the new system in it, I can assure you that you don't want more volts
Adrian.
That's kind of a given

> Also what is the max volts that the new Brush-less motor motion pack can use?
BLDC motors are rated in KV, which is the number of revolutions per volt. Owning and driving a JT, and having been fortunate enough to drive a Tiger with the new system in it, I can assure you that you don't want more volts



Adrian.
Contact me at sales@armortekaddict.uk for details of my smoker fan control module