Depends what you mean by high stress environment.
Each drive motor has a fuse set at 30A. This is more then enough for neutral turns on longish grass or carrying a person around.
If you are planning on exceeding that then you will also need to up-rate all your wiring and the power supply box - and potentially your batteries as well if you are running with a BMS.
The ALL NEW Armortek drive system for tanks
- Armortek
- Site Admin
- Posts: 2876
- Joined: Tue Jul 10, 2007 10:30 am
- Location: Winchester, England
- Been liked: 3378 times
-
- Posts: 25
- Joined: Wed Mar 29, 2023 8:48 pm
- Location: Pennsylvania
- Has liked: 6 times
- Been liked: 43 times
Re: The ALL NEW Armortek drive system for tanks
I was thinking of using a 24v 20ah Lithium Battery on a Jagdtiger with your new Brush-less motor motion pack I am getting from you. Or does it need more then 20ah of power to last longer? Also what is the max volts that the new Brush-less motor motion pack can use?
- Adrian Harris
- Posts: 5051
- Joined: Thu Jul 12, 2007 10:46 pm
- Location: Berkshire (UK)
- Has liked: 1363 times
- Been liked: 1556 times
Re: The ALL NEW Armortek drive system for tanks
> Or does it need more then 20ah of power to last longer?
That's kind of a given Space is not at a premium in the JT, I would probably go for 30Ah or 40Ah.
> Also what is the max volts that the new Brush-less motor motion pack can use?
BLDC motors are rated in KV, which is the number of revolutions per volt. Owning and driving a JT, and having been fortunate enough to drive a Tiger with the new system in it, I can assure you that you don't want more volts
Adrian.
That's kind of a given Space is not at a premium in the JT, I would probably go for 30Ah or 40Ah.
> Also what is the max volts that the new Brush-less motor motion pack can use?
BLDC motors are rated in KV, which is the number of revolutions per volt. Owning and driving a JT, and having been fortunate enough to drive a Tiger with the new system in it, I can assure you that you don't want more volts
Adrian.
Contact me at sales@armortekaddict.uk for details of my smoker fan control module