Hello all,
So I managed to capture a 2003 tiger 1 from Simon Manning. Before I start this interesting build. I will be looking for some good reference material.
If anyone has any good suggestions I love to hear about them. As I'm not sure what exact tiger I will be making.
2025 ARMORTEK KIT SURVEY
Over the last few years we have brought out a whole series of kits as a direct result of your feedback - kits like the Pershing, JagdPanther, Hetzer, Leopard 2A4, and more recently the Sd Kfz 7, 88mm Flak 36 and the upcoming Challenger 2.
So, in keeping with what has become and annual tradition, here is your opportunity to once again influence our future production plans.
We have added in some "guide pricing" next to the names of the models. This is a rough estimate of the price at the current rates.
Thanks in advance for your input and we look forward to the results.
2003 Tiger 1 Mid landed in Belgium
-
- Posts: 13
- Joined: Wed Jan 15, 2020 2:06 pm
- Has liked: 1 time
- Been liked: 13 times
-
- Posts: 2193
- Joined: Wed Nov 15, 2017 1:43 pm
- Location: Malta
- Has liked: 790 times
- Been liked: 1761 times
Re: 2003 Tiger 1 Mid landed in Belgium
Hi Tom. Will surely follow your build if you intend to show it. Just finished my Tiger 1.
Vince
Vince
-
- Posts: 13
- Joined: Wed Jan 15, 2020 2:06 pm
- Has liked: 1 time
- Been liked: 13 times
Re: 2003 Tiger 1 Mid landed in Belgium
Hi Vince
I will try to keep a log of the build. It won't be a quick one as Im abroad allot for work
I will try to keep a log of the build. It won't be a quick one as Im abroad allot for work
-
- Posts: 720
- Joined: Tue May 14, 2013 9:14 pm
- Location: Solihull
- Has liked: 2519 times
- Been liked: 444 times
- Contact:
Re: 2003 Tiger 1 Mid landed in Belgium
Best books would be Tigers in Combat Vol 1 to 3 the English versions are long out of print but in German its readily available then you have the series of books from Thomas L Jentz, D.W to Tiger I, Tigers at the front and Tiger I and II combat tactics, steer clear of anything from Waldemar Trojca his line drawings are known to be completely wrong and his colour plates are a figment of imagination for on line reference you could do no better than http://tiger1.info/ I hope this helps a little
-
- Posts: 13
- Joined: Wed Jan 15, 2020 2:06 pm
- Has liked: 1 time
- Been liked: 13 times
-
- Posts: 702
- Joined: Sun Feb 14, 2010 5:19 pm
- Location: Stockholm, Sweden
- Has liked: 745 times
- Been liked: 359 times
Re: 2003 Tiger 1 Mid landed in Belgium
Learned something there - thank you!mark lawson wrote: ↑Fri Jan 31, 2020 12:57 pmsteer clear of anything from Waldemar Trojca his line drawings are known to be completely wrong and his colour plates are a figment of imagination

A little too much is about right...
-
- Posts: 13
- Joined: Wed Jan 15, 2020 2:06 pm
- Has liked: 1 time
- Been liked: 13 times
Re: 2003 Tiger 1 Mid landed in Belgium
So after weeks of being abroad and removing surface rust. I finally started a first test fit of the hull.
Now waiting for an extra spray can of etch primer to do the last pieces for the final assembly.


Now waiting for an extra spray can of etch primer to do the last pieces for the final assembly.


-
- Posts: 707
- Joined: Fri Aug 29, 2008 5:04 pm
- Location: Seaford East Sussex
- Has liked: 211 times
- Been liked: 838 times
-
- Posts: 13
- Joined: Wed Jan 15, 2020 2:06 pm
- Has liked: 1 time
- Been liked: 13 times
Re: 2003 Tiger 1 Mid landed in Belgium
So I am not so good at remembering to take pictures and sharing a build.
Luckily I remembered to take some pictures today.
So the hull is now one piece.
I did a ton of painting and my first zimmerite.




Luckily I remembered to take some pictures today.
So the hull is now one piece.
I did a ton of painting and my first zimmerite.




- Steen Vøler
- Posts: 771
- Joined: Mon Nov 19, 2012 2:45 pm
- Location: Denmark
- Has liked: 62 times
- Been liked: 500 times