Pz4 Bruckenleger

Ray Brown · Post by **Ray Brown** » Thu Jun 28, 2018 4:42 am

One of many projects running concurrently.
Disclaimer: There is limited info on this vehicle with many obscure photos and 1 not so historically correct Trumpet brand 1/35 model to go off. So due to that and my limited skills, I have been slowly constructing the Bruckenleger with the following results and progress. The Armortek Pz is metal with all bridge parts currently 3d printer prototypes to eventually (no time commitment) be redone in metal. Any verification of correct or incorrect part modeling greatly appreciated. The order of photos unfortunately may not represent the construction time line. As Monty Python used to say, and now for something completely different.

Ray Brown · Post by **Ray Brown** » Thu Jun 28, 2018 5:30 am

Ray Brown · Post by **Ray Brown** » Thu Jun 28, 2018 5:43 am

Ray Brown · Post by **Ray Brown** » Thu Jun 28, 2018 5:47 am

Some modifications have been made since these photos were taken in January this year. As I progress I will add more and also a video with it moving. The large main parts have been printed. Now it's time for the fiddly bits. Cheers.

Christian Steinhauer · Thu Jun 28, 2018 12:08 pm

Hello Ray,

a very nice construction, I'm curious to see the laying process.

Robert E Morey · Post by **Robert E Morey** » Fri Jun 29, 2018 12:48 am

Ray,
Excellent and very ambitious project! The printed parts are a good idea to prove out the mechanism and mechanicals.

Here is a video of 1/10 scale version from Germany. Really cool to see how it really works. Its about 23 seconds into the video.
Cheers,
Bob

Ray Brown · Post by **Ray Brown** » Fri Jun 29, 2018 3:14 am

G'day Robert. The version you posted is the 'c'. I'm doing the'b' which is this one https://www.youtube.com/watch?v=vYklAXHURfI

https://www.youtube.com/watch?v=JcfDNYqSTTM

cheers

Robert E Morey · Post by **Robert E Morey** » Sat Jun 30, 2018 12:15 am

Ray
Didn't know there was a "B" or "C" version! LOL. Thanks for informing me! I like the version you are making - the mechanism looks a bit more robust. Great video - I like the recovery over small stream bed. Very cool.
Bob

Ray Brown · Post by **Ray Brown** » Wed Jul 04, 2018 4:54 am

3d printed boards using a wood filament

Ray Brown · Post by **Ray Brown** » Tue Jul 24, 2018 6:48 am

Mid build test drive.

https://youtu.be/WfJWTHcfcJc

sean kerambrun · Post by **sean kerambrun** » Wed Jul 25, 2018 1:56 am

Nice work there Ray.

Awesome to see it coming along.

Cheers

Sean

Ray Brown · Post by **Ray Brown** » Sat Apr 13, 2019 8:18 am

3d printed rear pieces for testing for placement and scaling.

waterjet cut aluminum for the bridge support clamped for alignment before securing with bolts.

Stephen White · Post by **Stephen White** » Sat Apr 13, 2019 9:31 am

Ray, thanks for providing us with such interesting stuff. "An up-and-over from Down-Under?" The Pz IV is a great Armortek model but gets little coverage these days. Particularly impressive given your lack of references.

Have you seen these:

http://imf.forum24.ru/?1-24-20-00000032 ... 1305482769

It's up there with David Skelton's models and some of the stuff Fabrice Le Roux did. Looking forward to the next instalment.

G'day.

Stephen

Ray Brown · Post by **Ray Brown** » Mon Apr 15, 2019 4:15 am

G''day Stephen,

I think I've harvested every p4 bridgelayer pic on the internet. Yes very limited info but doing the best with what I've got. Very slow wip.

Cheers
Ray

Ray Brown · Post by **Ray Brown** » Sat Jun 15, 2019 11:00 am

some more pics from the slowest build ever. nearly 900 rivets to be used along with a few 1/16 drill bits.

Pz4 Bruckenleger

Pz4 Bruckenleger

Re: Pz4 Bruckenleger

Re: Pz4 Bruckenleger

Re: Pz4 Bruckenleger

Re: Pz4 Bruckenleger

Re: Pz4 Bruckenleger

Re: Pz4 Bruckenleger

Re: Pz4 Bruckenleger

Re: Pz4 Bruckenleger

Re: Pz4 Bruckenleger

Re: Pz4 Bruckenleger

Re: Pz4 Bruckenleger

Re: Pz4 Bruckenleger

Re: Pz4 Bruckenleger

Re: Pz4 Bruckenleger