Can you use a FUTABA SKYSPORT 6 Radio Transmitter or do you have to use special transmitter for tanks -- if so where do you get one,
and how much do they cost?
Advice would be appreciated.
Colin Cahalin
2025 ARMORTEK KIT SURVEY
Over the last few years we have brought out a whole series of kits as a direct result of your feedback - kits like the Pershing, JagdPanther, Hetzer, Leopard 2A4, and more recently the Sd Kfz 7, 88mm Flak 36 and the upcoming Challenger 2.
So, in keeping with what has become and annual tradition, here is your opportunity to once again influence our future production plans.
We have added in some "guide pricing" next to the names of the models. This is a rough estimate of the price at the current rates.
Thanks in advance for your input and we look forward to the results.
technical question- PantherA
-
- Site Admin
- Posts: 3114
- Joined: Sat Oct 11, 2008 7:05 pm
- Location: Dorset
- Has liked: 1038 times
- Been liked: 2111 times
- Contact:
Re: technical question- PantherA
Colin
The legal answer is no. The FUTABA SKYSPORT 6 is, I believe, supplied with a 35mHz operating band, which in UK at least is restricted to airborne models. The 40 MHz band is allocated to surface models. Both frequency bands are only used on legacy systems which are very prone to interference and would also be subject to strict frequency control at any public display. Modern systems use 2.4Ghz and are protected against interference.
There is a comprehensive guide to selecting a radio in the Knowledge Base, here:
http://www.armortek.co.uk/Forum3b/viewt ... =34&t=6139
If you have other technical questions, Forum members will always try to help but it might save you trouble if you look for answers first in the Knowledge Base.
Stephen
The legal answer is no. The FUTABA SKYSPORT 6 is, I believe, supplied with a 35mHz operating band, which in UK at least is restricted to airborne models. The 40 MHz band is allocated to surface models. Both frequency bands are only used on legacy systems which are very prone to interference and would also be subject to strict frequency control at any public display. Modern systems use 2.4Ghz and are protected against interference.
There is a comprehensive guide to selecting a radio in the Knowledge Base, here:
http://www.armortek.co.uk/Forum3b/viewt ... =34&t=6139
If you have other technical questions, Forum members will always try to help but it might save you trouble if you look for answers first in the Knowledge Base.
Stephen
-
- Posts: 9
- Joined: Wed Sep 07, 2016 3:59 pm
-
- Posts: 9
- Joined: Wed Sep 07, 2016 3:59 pm
Re: technical question- PantherA
HELP ~~ CANNOT GET ELEVATION OF BARREL TO WORK. IT KEEPS GOING DOWN AND STOPPING DOWN AND RECOIL SERVO DOESN'T WORK AT ALL.
I'M USING A FUTABA SKYSPORT 6 TRANSMITTER AND 8 CHANNELS FUTABA RECEIVER ON 35.140 mhz.
DOES ANY ARMORTEK OWNER LIVE NEAR BISHOPS WALTHAM NR. SOUTHAMPTON, HAMPSHIRE THAT CAN HELP PLEASE.
THANKING YOU.
COLIN CAHALIN
I'M USING A FUTABA SKYSPORT 6 TRANSMITTER AND 8 CHANNELS FUTABA RECEIVER ON 35.140 mhz.
DOES ANY ARMORTEK OWNER LIVE NEAR BISHOPS WALTHAM NR. SOUTHAMPTON, HAMPSHIRE THAT CAN HELP PLEASE.
THANKING YOU.
COLIN CAHALIN
- Adrian Harris
- Posts: 5119
- Joined: Thu Jul 12, 2007 10:46 pm
- Location: Berkshire (UK)
- Has liked: 1475 times
- Been liked: 1674 times
Re: technical question- PantherA
Armortek are only in Otterbourne - probably closer than any of the owners !!
Adrian.
Adrian.
Contact me at sales@armortekaddict.uk for details of my smoker fan control module
-
- Posts: 720
- Joined: Tue May 14, 2013 9:14 pm
- Location: Solihull
- Has liked: 2519 times
- Been liked: 444 times
- Contact:
Re: technical question- PantherA
Colin, the 35mhz radio you are using on your tank is illegal this is for aircraft only, you should remove this and replace with either a 40mhz or a 2.4ghz radio that is all the advice that can be givenColin Cahalin wrote: ↑Fri Sep 08, 2017 3:58 pmHELP ~~
I'M USING A FUTABA SKYSPORT 6 TRANSMITTER AND 8 CHANNELS FUTABA RECEIVER ON 35.140 mhz.