FOTUBA 6EX JOYSTICK

Graham Ord · Post by **Graham Ord** » Wed Sep 03, 2008 9:13 pm

I know you can change the l/h joystick from ratchet to smooth feel by changing the spring which bears on the wheel inside, but can you make the joystick self centreing like the r/h one by fitting the missing parts? While I was fitting the smooth feel spring both sides looked like it was possible.

Roland Mann · Post by **Roland Mann** » Wed Sep 03, 2008 9:21 pm

Hi Graham,

yes you can. Just buy the set as it is fitted on the right side ( coil spring and leaver ) and install on left side. I have done it. Perfect controle with crrect feel.

Regards Roland

leesellars · Post by **leesellars** » Wed Sep 03, 2008 10:05 pm

Hello Grayham

As Roland says you need to by the return spring for that set. If you are going to the open day i will bring one down for you and i will fit it for you.

Lee

Tim Bowman · Post by **Tim Bowman** » Wed Sep 03, 2008 11:08 pm

Hi Lee and Roland,

Do older model Futaba radio control spring-stick sets fit the newer 6EX? I think I already know this answer. LOL

Graham, thanks for posting the question.

Tim

Roland Mann · Post by **Roland Mann** » Thu Sep 04, 2008 4:03 am

Hi Tim,

I do not know since I'm not an expert in such things. Sorry, but I have only told a single experiance with my RC.

What I forgot to mention, with this set of parts the stick will be centering automaticly, just as requested.

Good luck - Roland