Hi there
I do not use the switch unit original designed for the Blank Firer Unit.
a thought - could I connect the + & - from my Bosch front light and Rear light to the switch unit and then control the light on/off over a spare channel on my radio
cheers
Steen
CHALLENGER 2 PRE-ORDERS
NOW OPEN
EMAIL US AT SALES@ARMORTEK.CO.UK TO PRE-ORDER
CLICK HERE FOR MORE DETAILS
NOW OPEN
EMAIL US AT SALES@ARMORTEK.CO.UK TO PRE-ORDER
CLICK HERE FOR MORE DETAILS
Switch Unit to control Front and Rear Light
-
Steen Vøler
- Posts: 770
- Joined: Mon Nov 19, 2012 2:45 pm
- Location: Denmark
- Has liked: 62 times
- Been liked: 499 times
-
Adrian Harris
- Posts: 5076
- Joined: Thu Jul 12, 2007 10:46 pm
- Location: Berkshire (UK)
- Has liked: 1421 times
- Been liked: 1603 times
Re: Switch Unit to control Front and Rear Light
Hi Steen.
If you have the switch, then you may as well make use of it
You only need to connect the +ve through the switch, not both.
Adrian.
If you have the switch, then you may as well make use of it
You only need to connect the +ve through the switch, not both.
Adrian.
Contact me at sales@armortekaddict.uk for details of my smoker fan control module
-
Tim Bowman
- Posts: 1762
- Joined: Fri Jul 13, 2007 4:53 am
- Location: Northern California
- Been liked: 177 times
- Contact:
Re: Switch Unit to control Front and Rear Light
Hi Steen I use one of these on all my models to control the convoy lights.
http://www.robotmarketplace.com/product ... SW1_lg.jpg
Works great
Tim
http://www.robotmarketplace.com/product ... SW1_lg.jpg
Works great
Tim
"So long as one isn't carrying one's head under one's arm, things aren't too bad." – Erwin Rommel
-
Steen Vøler
- Posts: 770
- Joined: Mon Nov 19, 2012 2:45 pm
- Location: Denmark
- Has liked: 62 times
- Been liked: 499 times
-
Dennis Jones
- Posts: 892
- Joined: Wed Feb 04, 2009 11:19 am
- Location: Poole, Dorset
- Has liked: 10 times
- Been liked: 223 times
Re: Switch Unit to control Front and Rear Light
Hi Steen,
If you connect the front and rear lghts in series providing they are both 12 volts you can run the lights from the Armortek aux module direct and no need for a switch unit come back to me if you need further details.
Dennis.
If you connect the front and rear lghts in series providing they are both 12 volts you can run the lights from the Armortek aux module direct and no need for a switch unit come back to me if you need further details.
Dennis.