Yes its me and still alive. After some brake I have restarted my action to finish the rear of my early Tiger I. Most of all the Feifels hoses have been very difficult. But this is for a later report. By the time I was searching for informations on the Feifel
aircleaner I came across the exhaust covers on the early machines. And I have to say they looking so much better than the later versions in my eyes. So it was time to do a set of those. The picture I worked from most of the time is attached. A drawing was following and the material was 0.8 mm stainless steel for the laser cutting. My job than was knocking the ribbs and finaly bending the parts. Here are the pictures.
Best regards from Germany - Roland
