Finished Fender/Rear Lights

clive Lockwood · Post by **clive Lockwood** » Thu Feb 11, 2010 11:16 pm

Hi All,
Here are some photos of the finished hull width indicator lights and the rear light, they have been made so you can fit a bulb inside so the fronts are seperate, the front light stem has been drilled through for the wires and would require the bracket making, then the light will need to be glued on to the bracket the rear light has the two fixing holes pilot drilled and you will need to tap them to your prefered size of thread and make up the L shape bracket, pm me if your interested. cheers, clive.

David Da Costa · Post by **David Da Costa** » Fri Feb 12, 2010 3:26 am

Yes please Clive.

Thanks

David

Stephen White · Post by **Stephen White** » Fri Feb 12, 2010 5:42 am

Clive

They look superb. Yes please. Paypal ok again? Let me know when you're ready and how much. Really appreciate what you've achieved. Best regards. Stephen

Dale jordan · Post by **Dale jordan** » Fri Feb 12, 2010 7:00 am

I'm in for a set .... How lucky are we on this forum , that all these great modellers are willing to share their parts,,, go Clive ...Dale

Lawrence Godson · Post by **Lawrence Godson** » Fri Feb 12, 2010 7:07 am

Yes for me also on both. Very nicely done!

Derek Attree · Post by **Derek Attree** » Fri Feb 12, 2010 8:12 am

Hi Clive
Nice job on the lights. One thing I would like to know is where did you
get the hinge on the fenders I have been looking for ages for this.

Thanks

Derek

Antony Rowley · Post by **Antony Rowley** » Fri Feb 12, 2010 9:09 am

Hi Clive,

Your Panzer III is looking fantastic. I love all the extras your adding. Quality job

Thanks Ant

Ian Rodney · Post by **Ian Rodney** » Fri Feb 12, 2010 9:30 am

Hi Clive,

Great looking sets of Panzer III Hull Indicator Lights and Rear Lights too, could you put me down for above.

Cheers
Ian
from Glasgow, Scotland

Jim Fowler · Post by **Jim Fowler** » Fri Feb 12, 2010 10:04 am

Clive, I am interested in purchasing them, but you have not given a price?

colin fairweather · Post by **colin fairweather** » Fri Feb 12, 2010 8:04 pm

very nice clive well done

order pm sent

colin

Robert E Morey · Post by **Robert E Morey** » Sat Feb 13, 2010 4:28 am

Fantastic work Clive. Looking forward to seeing your P3 come together. You've set the bar high with your scratchbuilds. Great to see you turn your talent to an Armortek model.

Jeffrey Goff · Post by **Jeffrey Goff** » Tue Feb 16, 2010 12:56 pm

Hi Clive, your side lights and rear light just dropped though the letter box, you can not see it but I have a big smile on my face, they are great, well done, now whats next
regards
Jeff

clive Lockwood · Post by **clive Lockwood** » Tue Feb 16, 2010 10:49 pm

Thanks Jeff, pleased you like them, just got my front lights fitted tonight, i had to drill the centre out a bit more for the wires but other than that they went on fine, there is a conduit that runs from the lights over the fender and down towards the front lights on some pics i have, i think i,ll do something similar and place a juction box over the unused mounting hole, another problem solved.
clive

clive Lockwood · Post by **clive Lockwood** » Tue Feb 16, 2010 10:58 pm

forgot to mention, i am still working on the ariel mounting arm and am looking at the turret side hatches now, ther should be a metal port cover on one of the doors, i think both sides, its, not included in the kit so unless armorpax make it i will have to have a go at that as well, i,ll let you know.
clive

Lawrence Godson · Post by **Lawrence Godson** » Wed Feb 17, 2010 4:26 am

Hello Clive,
Do you have all the images that you need for the ariel mounting arm?

Finished Fender/Rear Lights

Finished Fender/Rear Lights

Indicator and rear lights