LEO-2A4

[Stanislav Yanev]

Thank you Andre

[Chang]

Hi Stanislav ,

Is it only me or to everyone, that your photos up to 4 November , were visible then but not so now?

Regards,
Lerh Chang


(Edited) They are visible again. Thanks for re-loading.

[Stanislav Yanev]

Hi Chang
I see them, but let someone else say if there is a problem

[Vince Cutajar]

I confirm what Chang noticed.

Vince

[Adrian Harris]

Same here. All the images before your Nov 4 post come up with 404 file not found errors:

Untitled.jpg (14.74 KiB) Viewed 1004 times

Even if you copy the link and paste it into a new browser window.

Adrian.

[Stanislav Yanev]

Guys look please now I tried to upload everything to a new one

[Paul Sparkes]

working for me again

[Vince Cutajar]

Photos working again.
Thanks
Vince

[Stanislav Yanev]

So the best thing that everyone has access to these days is a 3d printer,so have I from the magnificent printers of Raise3d
Тhis allows me to quickly and cheaply see what the part will look like before being made of aluminum.
This will be added to the original detail of Armortek (BUMP STOP TYPE A)





In order for the addition to acquire an authentic look, I had to remove a few millimeters from the part CV0115C





Then collect the details




Everything is made in such a way that it fits the original holes and also leaves out a detail CV0115B

[Stanislav Yanev]

I continue with the suspension parts. I think that the result of the friction between iron and aluminum will not last long, so I decided to change it
I start with the processing of BOGIE HOUSING









Bushing fabrication and testing with SUSPENSION SHAFT



Тesting bushing with BOGIE HOUSING , all this will be pressed to the end, and I don't know if there will be any point in securing it with LOCTITE 638

[Stanislav Yanev]

Hello
Today i started making all new and as detailed as i can LONG and SHORTS RETURN ROLLER
Аs always in the pictures is the sequence of processing the details

[Stanislav Yanev]

Christmas surprises came early

[Stanislav Yanev]

Hello and Merry Christmas to all
I decided to play with REAR VENT ,I start by changing the shape, distance, and way of gripping and assembling this part of the model.
I did a few tests for TIG welding of the used material,to set the best possible weld quality



CV0314 detail it was size adjusted from the two sides
CV0316 and CV0316M were replaced with new details that fit the shape I wanted
CV0315 and CV0315M one of each was repositioned to more closely match the original
CV0317 -7 pieces were cut from the original ones in the kit and the rest were made new.


M3x12 BUTx10 units were welded for CV0314



General rear view


the two side grilles were also welded and sample mounting

[Chang]

Hi Stanislav,

In one of the photos dated 19 Oct 2024 , is it your customer-made Gun barrel adaptor that to replace the kit original part (XRE028-Leo 2)?

Best regards,

Lerh Chang

[Stanislav Yanev]

Hi Chang
I have not purchased original Armortek option pack
This detail was made by me.to answer to my design of RECOIL system.a and fit the details of the barrel.
It is different I don't know how the "problem" with moving the barrel ( which prevents unwanted forward and backward movement) is solved with Armortek option pack
.But I think I did something and I'll post pictures at a later stage