2024 Jagdpanther No43 build log.

[chris fry]

Hello all,
I am putting together Jagdpanther kit number 43 for an overseas client, So decided to put together a build log in pictures of the build from start to finish, This will be a standard build with all the option packs fitted and a high standard paint job, If there's any questions along the way please feel free to ask, For a lot of the builders on the forum it wont help but for new builders some of the pictures might help, I will keep adding the build stages as i go along,
kind regards, Chris.

boxes full goodies

step 1 front glacis plate.

step 2 rear plate details.

suspension bushes and bars fitted, follow the instructions with adding the torsion bars at this stage.

half of the torsion bars added,

hull sides and front & rear plates fitted.

showing motor mounts fitted,

front bump stops

mid and rear bump stops.

r/h side bump stops fitted.

[Robert Tanzer]

Thanks for this Chris

[Derek Attree]

Hi Chris
This is going to be a very useful resource.

Thanks for posting

Regards Derek

[chris fry]

more build steps,

torsion bar and suspension shaft and suspension arm/axle assembly

all torsion bars fitted and angles set.

torsion bar fasteners

first stage of wheel assembly, all 32 !!!

regards, chris.

[chris fry]

more build stages,

roadwheel b assembly.

roadwheel a & b assemblies fitted.

pannier floors fitted

sprockets assembly, note timing marks on sprocket rings

drive case fitted.

idler tension arm

L/h side details added.

Lhs engine fan assembly

Rhs engine fan assembly

more to follow,

[Robert Tanzer]

Thanks for your update, looks great.

Robert

[chris fry]

thanks robert,
a few more pictures,

Idler wheel assembly

some of the parts that we have sujested to modify,

Track tensioner mod.

CP0180 mod.

Sprocket ring chamfering. top one unmodified bottom one chamfered, helps with running in with tracks when new.

Wheel hub cap magnets, My mod, magnet glued in on inside of hub caps and will attaché to wheel retaining fastener, makes removing hub cap easier,

[Robert Tanzer]

Thank you Chris
This is very helpful for me.
Looking forward to the next one.
Robert T

[chris fry]

Thank you Robert and glad it may help builders, I started doing this build log as i recently talked to tony from Tonys workshop on youtube, and chatting to him and what questions he gets from his you tube channel viewers, What might stop someone new taking on an armortek kit build, and it was peoples perception on it might be to difficult to build, but these kits now are really easy to build, this jagdpanther really does go together very well and if you follow the manual or follow build logs etc they are a delight to put together,

Engine cover details.

Complete rear deck assembly, just tools to add.

Inner mantlet

Don't attach the mantlet at this stage as its much easier to build all the gun assembly in to the mantlet off the tank, also fitting actuators/brackets etc from the motion pack and recoil if fitting. the whole assembly will fit built through the glacis plate.

More soon,

[Robert Tanzer]

Looking forward to the next one

[Derek Attree]

Hi Chris
Still watching from the beach it's going ro be a big help .

Regards Derek