Video call
-
- Posts: 717
- Joined: Tue May 14, 2013 9:14 pm
- Location: Solihull
- Has liked: 2487 times
- Been liked: 443 times
- Contact:
-
- Posts: 717
- Joined: Tue May 14, 2013 9:14 pm
- Location: Solihull
- Has liked: 2487 times
- Been liked: 443 times
- Contact:
- Dave Goodwin
- Posts: 124
- Joined: Sat Oct 21, 2023 3:01 pm
- Location: Vermont, USA
- Has liked: 27 times
- Been liked: 122 times
-
- Posts: 675
- Joined: Sun Feb 14, 2010 5:19 pm
- Location: Stockholm, Sweden
- Has liked: 688 times
- Been liked: 296 times
My models
These are my models:
It's currently 5C in the garage, so avoiding any work there...
/Christoffer
The T1 is a 2010 mid version that I have backdated (partially) to an early version.It's currently 5C in the garage, so avoiding any work there...
/Christoffer
A little too much is about right...
- Jerry Carducci
- Posts: 724
- Joined: Sun Apr 05, 2020 7:38 pm
- Location: The People's Paradise of California, the former Golden State
- Has liked: 3 times
- Been liked: 1010 times
- Contact:
Re: Video call
I want to thank Christoffer, Dave and all the rest of you who joined; we had a very good session yesterday!
See you all in a month..
Jerry
See you all in a month..
Jerry
http://tanks.linite.com/ - RC tanks: stay home, build a tank and save a life!
- Jerry Carducci
- Posts: 724
- Joined: Sun Apr 05, 2020 7:38 pm
- Location: The People's Paradise of California, the former Golden State
- Has liked: 3 times
- Been liked: 1010 times
- Contact:
Re: Video call
Reminder!
Next session will be next Saturday, February 4, 13:00 Eastern/ !0:00 Pacific (or 17:00 UTC if you prefer).
Be there or be square!
Jerry
Next session will be next Saturday, February 4, 13:00 Eastern/ !0:00 Pacific (or 17:00 UTC if you prefer).
Be there or be square!
Jerry
http://tanks.linite.com/ - RC tanks: stay home, build a tank and save a life!
- Adrian Harris
- Posts: 5028
- Joined: Thu Jul 12, 2007 10:46 pm
- Location: Berkshire (UK)
- Has liked: 1331 times
- Been liked: 1530 times
Re: Video call
Saturday is the 3rd over here
Adrian.
Adrian.
Contact me at sales@armortekaddict.uk for details of my smoker fan control module
- Jerry Carducci
- Posts: 724
- Joined: Sun Apr 05, 2020 7:38 pm
- Location: The People's Paradise of California, the former Golden State
- Has liked: 3 times
- Been liked: 1010 times
- Contact:
Re: Video call
Ooopsie! Indeed it is here as well! Sleepy eyes and hands are the makings of mistakes; better with the keyboard than with
one of my model projects!
Allow me to try again!:
Next session will be next Saturday, February 3, 13:00 Eastern/ !0:00 Pacific (or 17:00 UTC if you prefer).
Be there or be square!
Jerry
http://tanks.linite.com/ - RC tanks: stay home, build a tank and save a life!
- Jerry Carducci
- Posts: 724
- Joined: Sun Apr 05, 2020 7:38 pm
- Location: The People's Paradise of California, the former Golden State
- Has liked: 3 times
- Been liked: 1010 times
- Contact:
Re: Video call
Greetings and felicitations!
Reminder!
Next Zoom session will be next Saturday, March 2, 13:00 Eastern/ !0:00 Pacific (or 18:00 UTC if you prefer).
Hope you all are able to attend... if you need the link drop me a note.
Jerry
Reminder!
Next Zoom session will be next Saturday, March 2, 13:00 Eastern/ !0:00 Pacific (or 18:00 UTC if you prefer).
Hope you all are able to attend... if you need the link drop me a note.
Jerry
http://tanks.linite.com/ - RC tanks: stay home, build a tank and save a life!
-
- Posts: 675
- Joined: Sun Feb 14, 2010 5:19 pm
- Location: Stockholm, Sweden
- Has liked: 688 times
- Been liked: 296 times
Re: Video call
We were discussing recoil systems today. I shot a couple of clips to show you the one in Per Sonnervik's JT. This is a scratch build, so differs from Armortek. The small RC aircraft cylinder only has a 5cm throw. It should be 2-3 times that, depending on whether the gun was cold or hot. Despite this, it does a fair job, I think. Still, I am going to get industrial cylinders and valves to get more schwung to it.
The contraption is controlled by an Arduino, which reads the RC gun control servo signal and controls the valve servo on "dead reckoning".
//
The contraption is controlled by an Arduino, which reads the RC gun control servo signal and controls the valve servo on "dead reckoning".
//
A little too much is about right...
- Jerry Carducci
- Posts: 724
- Joined: Sun Apr 05, 2020 7:38 pm
- Location: The People's Paradise of California, the former Golden State
- Has liked: 3 times
- Been liked: 1010 times
- Contact:
Re: Video call
Apologies for being late to post this, The next video session will be tomorrow 4/6 at 13:00 Eastern/ !0:00 Pacific/ 17:00 UTC. (it's PDT over here)
I may need to keep the session right at an hour as I may have to leave abruptly.
Jerry
I may need to keep the session right at an hour as I may have to leave abruptly.
Jerry
http://tanks.linite.com/ - RC tanks: stay home, build a tank and save a life!
- Jerry Carducci
- Posts: 724
- Joined: Sun Apr 05, 2020 7:38 pm
- Location: The People's Paradise of California, the former Golden State
- Has liked: 3 times
- Been liked: 1010 times
- Contact:
Re: Video call
Next Saturday May 4 will be our next Zoom session, usual time!
Jerry
Jerry
http://tanks.linite.com/ - RC tanks: stay home, build a tank and save a life!
- Jerry Carducci
- Posts: 724
- Joined: Sun Apr 05, 2020 7:38 pm
- Location: The People's Paradise of California, the former Golden State
- Has liked: 3 times
- Been liked: 1010 times
- Contact:
Re: Video call
This coming Saturday June 1 will be our next Zoom session, usual time!
Jerry
Jerry
http://tanks.linite.com/ - RC tanks: stay home, build a tank and save a life!
- Jerry Carducci
- Posts: 724
- Joined: Sun Apr 05, 2020 7:38 pm
- Location: The People's Paradise of California, the former Golden State
- Has liked: 3 times
- Been liked: 1010 times
- Contact:
Re: Video call
The next Zoom call will be Saturday July 6th, usual time.
This will be the last call I schedule; if one of you would like to take over coordination please let me know else this call will be our last.
Thanks to all who have attended these over the last year! It has been a great time.
Jerry
This will be the last call I schedule; if one of you would like to take over coordination please let me know else this call will be our last.
Thanks to all who have attended these over the last year! It has been a great time.
Jerry
http://tanks.linite.com/ - RC tanks: stay home, build a tank and save a life!
- Jerry Carducci
- Posts: 724
- Joined: Sun Apr 05, 2020 7:38 pm
- Location: The People's Paradise of California, the former Golden State
- Has liked: 3 times
- Been liked: 1010 times
- Contact:
Re: Video call
I've been asked if I would continue the video calls.
I'll ask the question 'point blank': who is interested in attending Zoom video calls going forward? We've had some terrific desicussions over the last year or so and personally I've enjoyed seeing and speaking with everyone.
So far it's the closest thing we in the West Coast colonies in particular have to a 'gathering'.
Any 'Armortek people' from anywhere are welcome to join.
Jerry
I'll ask the question 'point blank': who is interested in attending Zoom video calls going forward? We've had some terrific desicussions over the last year or so and personally I've enjoyed seeing and speaking with everyone.
So far it's the closest thing we in the West Coast colonies in particular have to a 'gathering'.
Any 'Armortek people' from anywhere are welcome to join.
Jerry
http://tanks.linite.com/ - RC tanks: stay home, build a tank and save a life!