Nice work and thanks for sharing
A quick question. What as the size and diameter of the roll pins you used for the swing arms. My T1 is boxed still but I want to have the roll pins ready.
Regards,
Chris.
2025 ARMORTEK KIT SURVEY
Over the last few years we have brought out a whole series of kits as a direct result of your feedback - kits like the Pershing, JagdPanther, Hetzer, Leopard 2A4, and more recently the Sd Kfz 7, 88mm Flak 36 and the upcoming Challenger 2.
So, in keeping with what has become and annual tradition, here is your opportunity to once again influence our future production plans.
We have added in some "guide pricing" next to the names of the models. This is a rough estimate of the price at the current rates.
Thanks in advance for your input and we look forward to the results.
Martin's Sturmtiger
-
Chris.Marshall
- Posts: 64
- Joined: Wed Sep 27, 2023 12:37 pm
- Has liked: 2 times
- Been liked: 32 times
Re: Martin's Sturmtiger
Martin !
Nice work and thanks for sharing
A quick question. What as the size and diameter of the roll pins you used for the swing arms. My T1 is boxed still but I want to have the roll pins ready.
Regards,
Chris.
Nice work and thanks for sharing
A quick question. What as the size and diameter of the roll pins you used for the swing arms. My T1 is boxed still but I want to have the roll pins ready.
Regards,
Chris.
Tiger 1 Early - (Kit42) - Still boxed.
-
Martin Hofmann
- Posts: 484
- Joined: Tue Jan 06, 2015 4:20 pm
- Location: Hamburg, Germany
- Has liked: 151 times
- Been liked: 1985 times
Re: Martin's Sturmtiger
Hi Chris,
thank you for your nice words.
The diameter of the pins is 2,5mm and the lenght is 18mm.
thank you for your nice words.
The diameter of the pins is 2,5mm and the lenght is 18mm.
Regards Martin
-
Chris.Marshall
- Posts: 64
- Joined: Wed Sep 27, 2023 12:37 pm
- Has liked: 2 times
- Been liked: 32 times
-
Martin Hofmann
- Posts: 484
- Joined: Tue Jan 06, 2015 4:20 pm
- Location: Hamburg, Germany
- Has liked: 151 times
- Been liked: 1985 times
Re: Martin's Sturmtiger
Here comes some small update. I made some parts of the back side of the Sturmtiger.
The starter plate with the starter, the armoured covers of the exhausts and all their casting numbers and the casting surfaces are done.
The starter plate with the starter, the armoured covers of the exhausts and all their casting numbers and the casting surfaces are done.
- Attachments
-
-
-
-
-
-
-
-
-
-
Regards Martin
-
Martin Hofmann
- Posts: 484
- Joined: Tue Jan 06, 2015 4:20 pm
- Location: Hamburg, Germany
- Has liked: 151 times
- Been liked: 1985 times
Re: Martin's Sturmtiger
Here are some more photos from the last built from the motor plate and all the gratings above.
- Attachments
-
-
-
-
-
-
-
-
-
-
Regards Martin