KingTiger / JagdTiger steel sprocket rings

[Kees van Rijswijk]

Hi all,
Last September I received from Sweden a steel example of a sprocket ring KT/JT. And two days later a digital 3d file of the sprocket ring from Australia. A few weeks later received the detailed drawings of this from Germany.
After we have mixed all this information together came up with a set of steel sprocket rings for KT/JT. The rings are CNC milled and Laser cut.
The rings are tested on my JT with steel tracks. And the drop off from the sprocket is after the third teeth even at full speed. As it should be like the real KT/JT.
To reduced the costs we made a one time series of 10 sets. A set costs 200 euro plus shipping.

If you are interested please PM or email me.

I will visit Bovington SW model show on Feb 10th, if wanted i can bring sets with me.

k.v.rijswijk@hotmail.com
Kind regards

[Kees van Rijswijk]

Hi all,
Only three sets are left.
Even with standard AT tracks it is a driving improvement.
Less "clicking" in forward and turning.

Kind regards Kees

[Kees van Rijswijk]

Hi all,

Last two sets available.

kind regards Kees

[Chang]

Hello Kees,

I would like to order one set (i.e. 4 rings) from Australia.

Best regards,

Lerh Chang

[Kees van Rijswijk]

hi Chang,
PM sent
kind regards kees

[neil graham]

PM's down unfortunately......

Assuming a set is still available

My email is my full name with my middle name 'scott' in the middle, no spaces or anything else. n___scott_____m AT hotmail.co.uk

[Kees van Rijswijk]

Hi Niel,

Please contact me at k.v.rijswijk@hotmail.com

kind regards kees

[neil graham]

Hi Kees,
I am very sorry, I am now picking up some extras for the Tiger 1 that I am building, so I have reached my limit for now.
The JT I am still paying off.....