The Official Armortek Forum - World leader in one sixth scale metal kits

Hello to you all. Just a quick note to introduce myself as the new owner of KT 2019 # 29 that Audrius kindly transferred to me earlier

Welcome Mike.

I'm not sure what you mean by "wing". Any chance you can provide the part number and pictures of the area ?

Adrian.

Adrian

Many thanks for taking the time to reply.

5mm sounds more than expected.

There are instructions for photos in the Armortek Owners page under Dale's post.

Adrian

viewtopic.php?p=92804#p92804

Vince

Greatly appreciate your efforts to assist but every time I have tried to upload phots I am told that the file is too big to download.

Thanks for trying

Michael Email the photo back to yourself then you can choose file size Dale

Thanks

The cutouts in the rear side plate where the rear plate tung slots in file the rounded corners more square it will give you more room to aline the plates hope this helps Dale

Thanks

I just had a look at my KT build blog 2009 page 7 10 posts down I might have had a similar thing Dale

Dale

Thanks for trying

Reasonably pleased with my first attempt at getting this put together.

Hi Mike
It might be worth looking at some of the other posts, Tom had a similar issue.
viewtopic.php?f=16&t=8222&sid=7f9c5b579 ... d55dcc82cd

Liam

Liam

Thanks for taking the time to assist.