Yves sdkfz 9 update

[yves mouton]

Thanks for the replay Derek.
Best regards Yves

[florian rudolf]

Look here

IMG_20210828_142523.jpg (101.71 KiB) Viewed 6413 times

[yves mouton]

Thanks Florian,

Now i understand it
Made some progress on the famo.








Best regards Yves

[yves mouton]

Hello

I have a question, can you use a actuator ( like steering actuator for the famo )
for a recoil unit for the ( pak 40 ) i wanne use that on my sdkfz 251? If you connect the actuator on the Armortek recoil
module will it work fast for shooting and pull back slowly

Best regards Yves

[Adrian Harris]

Actuators tend to use a motor turning a screw thread, so would never be fast enough to work as a recoil.

Adrian.

[yves mouton]

Thanks Adrian

Little update, i cut down the fenders






Best regards Yves

[yves mouton]

Hello,

A little update again,

Workt on some details on the fenders.





Also made a plate to close the famo on the underside.



Best regards Yves

[florian rudolf]

Hi Yves,
why did you close the underground with this plate?

Cheers
Florian

[yves mouton]

Hello Florian,

I like it more with a closed bottom, i did
this also with my 251

Ps: your foto's of your famo build are a great help for me thanks.
I also orderd some U- profiles for the functional window.

best regards Yves

[florian rudolf]

Hi Yves,
glad to help you.
At the 251 it is helpfull to close the bottom.
Reason is dust in the suspension and in my case to protect the electronic parts.

At the Famo the suspension is allready protect with the tubes.

[yves mouton]

Hello, Florian

The wing nuts that you use on the window is this M2 or M3?
And were can you find these? I have wing nuts from Armortek but i think they are M3 and that's maybe a little to big?
My profiles for the window arrived yesterday from germany ( Knupfer )

Did you cut the window glass with a dremel?
Something else: It is a little bit strange that there no springs on the idler system of the famo??
I think i will put some springs on it.
Ps: where did you find all the different sides of rivits?

Best regards Yves

[florian rudolf]

Hi Yves,
well the wing nuts are M1,5.
I have all the rivets, screws and nuts from knupfer.

I milled the disc.
Which deflection system of the Famo do you mean??

[yves mouton]

Hello Florian,

I cant find wing nuts on the Knupfer webside.
I mean the Idler system ( to change the tracktension ) i think it is safer with a spring on.
They use springs on the idler of the stug 3 also.

Best regards Yves

[Vince Cutajar]

https://knupfer.info/shop/index.php/det ... ttern.html

Vince

[yves mouton]

Thanks Vince

Best regards Yves