The Official Armortek Forum - World leader in one sixth scale metal kits

Just wondered if anyone has setup a Spektrum dx9 transmitter for their tank? I have been trying but with no luck so far. Any advice appreciated.

There's a whole Knowledge Base Topic on the subject here:

viewtopic.php?f=34&t=5795

yes, I followed the instructions as closely as possible but it appears the DX9 has a slightly different menu to the other two transmitters.

What problems are you having Andy ?

Dennis.

Ive been using a DX9 for the last 2-3 years with all my models without any problems.
Tim

Dennis Jones wrote: ↑

Tue Apr 27, 2021 11:04 am

What problems are you having Andy ?

Dennis.

I followed the forum instructions to setup the tx / receiver but cant get motors to work. I managed to do it with a DX6i, but not DX9 Black. I'm not sure if its a faulty rx, but it bound to the tx okay.

Sounds like you might not be bound correctly.

Try re-binding RX/TX

Good luck
Tim

Have you plugged servos in to the each channel to try them ? Is the light on the RX on solid ?

Dennis

Dennis Jones wrote: ↑

Wed Apr 28, 2021 11:15 am

Have you plugged servos in to the each channel to try them ? Is the light on the RX on solid ?

Dennis

Yep, nothing works with the DX9 / Rx combo......yet works fine with the DX6i / Rx combo. Both Tx / Rx bind fine with the flashing light going solid. I suspect the Rx I'm using with the DX9 may be faulty, but I dont have another that works with it.

Hiya, In that case the only other thing that springs to mind is that maybe you have the leads into the RX the wrong way up.

The black wire should be on top.

Cheers
Tim

I have at last got the DX9 Tx and AR9020 Rx working. It appears this Rx wont work unless 2 satellite Rx are connected to it