Florian StuG build
Posted: Fri Feb 26, 2021 8:24 pm
Now I'll start my new building block of my secound StuG from Armotek.
First building pictures comming soon
First building pictures comming soon
Page 1 of 4
Re: Florian StuG build
Posted: Fri Feb 26, 2021 10:04 pm
StuG meets Famo
Start building
Re: Florian StuG build
Posted: Sat Feb 27, 2021 8:12 pm
Today it is going on at hull, gear, and wheels...
Had some trubble with my driven gear, like I read it allready, so I had something to drill.
Had some trubble with my driven gear, like I read it allready, so I had something to drill.
Re: Florian StuG build
Posted: Sat Feb 27, 2021 8:14 pm
It looks realy smal next to the Famo 
But fortunatly there are many parts comming soon to make the StuG bigger.
Re: Florian StuG build
Posted: Sun Feb 28, 2021 8:19 am
Hi Florian, good luck on your new StuG build!
I’m looking forward to seeing your progress and accomplishments.
Btw, the size comparison with the Famo is impressive
I’m looking forward to seeing your progress and accomplishments.
Btw, the size comparison with the Famo is impressive
Re: Florian StuG build
Posted: Sun Feb 28, 2021 7:09 pm
Thank you Roy,
well I don't want to bore you guys, because here are many threads about the StuG. I'll post all I make diffrent way to the kit.
Now I still working at the normal hull stuff. the welging is comming soon.
Some hull parts I plan to take in my sand blast cabine.
Cheers
Florian
well I don't want to bore you guys, because here are many threads about the StuG. I'll post all I make diffrent way to the kit.
Now I still working at the normal hull stuff. the welging is comming soon.
Some hull parts I plan to take in my sand blast cabine.
Cheers
Florian
Re: Florian StuG build
Posted: Sun Mar 07, 2021 7:58 pm
Did some work this weekend...
1. I had to drill down the inner roadwheels, because the chain teeth are a little too thick...
1. I had to drill down the inner roadwheels, because the chain teeth are a little too thick...
Re: Florian StuG build
Posted: Sun Mar 07, 2021 8:02 pm
2. I blasted different parts. This is used for the later look
Re: Florian StuG build
Posted: Sun Mar 07, 2021 8:07 pm
Last but not least I started to make the the suspension.
Finish for today. It lokks like a tank now 
Re: Florian StuG build
Posted: Sat Mar 13, 2021 7:01 am
Last time I did some work on the track wheels.
I drilled the sleeves for a bit better looking scale look out.
Big brother is whatching grow up
I drilled the sleeves for a bit better looking scale look out.
Re: Florian StuG build
Posted: Fri Mar 19, 2021 7:01 pm
Did some wellding today.
Re: Florian StuG build
Posted: Sun Mar 21, 2021 8:15 pm
Its wellding day halleluja.....
I did nearly all wellding work today. Next thing is the primer paint and begining to do more detailing
I did nearly all wellding work today. Next thing is the primer paint and begining to do more detailing
Re: Florian StuG build
Posted: Mon Mar 22, 2021 6:03 am
Well done
Re: Florian StuG build
Posted: Sun Mar 28, 2021 8:51 pm
Hi all,
today I did something an the upper hull top roof.
I'll fix it with neo dyn magnets (5mm x 2mm). I pressed the magnets into the 3mm hull plate, where the metal holders for the cover is. Than I glue ftom the top side with 2k alu metal glue. I need 24 magnets. It fix it perfectly and strong enouth.
Forther I did some model M3 screws for scale look.
Also optimized the wellding on the track wheels.
Cheers
Florian
today I did something an the upper hull top roof.
I'll fix it with neo dyn magnets (5mm x 2mm). I pressed the magnets into the 3mm hull plate, where the metal holders for the cover is. Than I glue ftom the top side with 2k alu metal glue. I need 24 magnets. It fix it perfectly and strong enouth.
Forther I did some model M3 screws for scale look.
Also optimized the wellding on the track wheels.
Florian
Re: Florian StuG build
Posted: Sun Mar 28, 2021 9:07 pm
Wow!
That's a lot of magnets!
Interesting concept!
That's a lot of magnets!
Interesting concept!