Page 1 of 2
Armorpax Pak 43 Update Set
Posted: Mon May 09, 2016 11:30 pm
by Dave Dibb (Armorpax)
Hi All,
Spoke to my metal casters today and they expect to complete the metal moulds within the next 3 weeks. I will start casting the resin parts for the first batch at the same time so expect to be able to start shipping update sets in approx. 4 weeks time.
There are considerably more metal parts in this set than the 25 Pounder and Limber and unfortunately the mould and development costs are a lot higher than the previous kits.
Kit price is £229.16 but I do not have an accurate postal weight yet. Postage will of course be at cost as on all our kits.
I am accepting payments now for the kit costs for those who wish to be included in the first run. Postal options and costs will be advised once the first kits are fully packed.
Best regards
Dave
Re: Armorpax Pak 43 Update Set
Posted: Tue May 10, 2016 12:46 am
by Mark Adams
OK! How do I give you my money?
Re: Armorpax Pak 43 Update Set
Posted: Tue May 10, 2016 8:44 am
by Ian Rodney
Hi Dave,
Great news to hear about the Pak 43 Update Set.
Could you please put my name down on your list for a set, if I've not sent it before.
Meanwhile I will forward on the Kit price via Paypal.
And the postage can be sorted out later on when you get the postal weights etc.
Regards
Ian
from Glasgow
Re: Armorpax Pak 43 Update Set
Posted: Wed May 11, 2016 5:16 pm
by Timo Winterlich
Hi Dave,
nice to hear this. I like to buy one kit.
Regards Timo
Re: Armorpax Pak 43 Update Set
Posted: Wed May 11, 2016 6:45 pm
by Uwe Gerstenmayer
Hi Dave,
fantastic news
As posted before I'm down for one set !
Payment sent via PayPal .
All the best from Business in Bavaria
Uwe

Re: Armorpax Pak 43 Update Set
Posted: Thu May 12, 2016 5:27 pm
by Walter Mackinnon
Hi Dave,
Have just sent for a set via Pay Pall, will you be doing a CD again as you did for the limber update set ?.
Regards Walter.
Re: Armorpax Pak 43 Update Set
Posted: Thu May 12, 2016 5:56 pm
by Dave Dibb (Armorpax)
Hi Walter,
I have been taking loads of pics during the build and will have a CD again. I don't have my own walkround of the real deal as I have been using one I found on line but will include a link to it.
Best regards
Dave
Re: Armorpax Pak 43 Update Set
Posted: Thu May 12, 2016 5:58 pm
by Dave Dibb (Armorpax)
And thank you to all those who have already sent payments. Your all on the my list and I will be in touch as soon as we are ready to start shipping. Warned my metal casters today that the dates are now set in stone
Best regards
Dave
Re: Armorpax Pak 43 Update Set
Posted: Sun Jun 12, 2016 11:39 pm
by Dave Dibb (Armorpax)
Hi All,
The initial production batch is now well underway and I would like to thank all those who have pre-ordered. If you have not pre-ordered the kit will go on general release after War and Peace. My metal casters are running the moulds as they complete them to allow us to despatch as soon as possible after the last mould is done. I have included a pic of some of the metal parts so far and also the last 2 days resin casting. I am having to use a resin with a longer pot life as casting over the last few weeks has been interesting with the higher temps. I still hope to complete all the resin parts by the end of the week and then we are just waiting on the final metal moulds.
Best regards
Dave

Re: Armorpax Pak 43 Update Set
Posted: Wed Jun 15, 2016 8:48 pm
by Dave Dibb (Armorpax)
Hi All,
Metal brake handle parts and a few other bits done. The end is in sight!!
Best regards
Dave

Re: Armorpax Pak 43 Update Set
Posted: Thu Jun 16, 2016 8:20 am
by Timo Winterlich
Hi Dave,
the parts are looking realy realy great!
Good work!
Regards Timo
Re: Armorpax Pak 43 Update Set
Posted: Thu Jun 16, 2016 9:15 pm
by Pete Hacker
Looking good Dave...looking forward to the kit.
Thanks for the update,
Pete
Re: Armorpax Pak 43 Update Set
Posted: Mon Jun 20, 2016 7:38 pm
by Dave Dibb (Armorpax)
Hi All,
Its going to be touch and go but if my casters can get me the final mould set to approve on Wednesday and ship Thursday I could have the metal parts with me for Tank Fest. If anyone on the pre-order list (and has paid) is going let me know and you might save the postage!
Best regards
Dave
Re: Armorpax Pak 43 Update Set
Posted: Wed Jun 22, 2016 8:35 pm
by Dave Dibb (Armorpax)
Hi All,
Its done, full set pic below. I will work out the shipping cost and if all the parts for the pre-orders arrive Friday as planned we can start shipping them out after Tank Fest.
Best regards
Dave

Re: Armorpax Pak 43 Update Set
Posted: Mon Jun 27, 2016 4:38 pm
by Chang
Hello Dave,
Am I right that in the above-shown photo, basically:
the top and central right parts are made of resin (more in white), and
the left and below parts are soft metal (in grey)?
Best Regards,
Lerh Chang
