Tiger battle Damage

Forum for discussion relating to Tiger 1, Mid, Early, Late Production and Sturmtiger
Post Reply
Dale jordan
Posts: 1456
Joined: Fri Jul 13, 2007 1:10 am
Location: Port Macquarie Australia
Been liked: 514 times
Contact:

Tiger battle Damage

Post by Dale jordan »

Here is a shot of the start of adding small arms fire and shell damage to my tiger . It was a bit scary doing this .. The thought of having a factory fresh tiger is not for me . Dale

Image

Dale jordan
Posts: 1456
Joined: Fri Jul 13, 2007 1:10 am
Location: Port Macquarie Australia
Been liked: 514 times
Contact:

Post by Dale jordan »

Image

User avatar
Robert E Morey
Posts: 2351
Joined: Wed Jul 18, 2007 12:59 am
Location: Seattle, WA USA
Has liked: 161 times
Been liked: 830 times

Post by Robert E Morey »

C'mon Dale give it good bash! A 76mm hit right on the front would look great! I'm with you factory fresh tanks look a bit odd, and only lasted that way in reality for a few minutes!
Great details to add!
Bob

Lionel Champ
Posts: 67
Joined: Sat May 24, 2008 10:52 am
Location: Dartford,Kent
Been liked: 1 time

Post by Lionel Champ »

Trying not to change the subject to much, I am planning to show battle damage to my Tiger, but I don't know what base paint colour would show(if any) when the zimmerite chips off. I have a late production Tiger and I plan to have it in the 101st (Heavy) SS Panzer Battalion as at 06.06.1944. I am guessing that Dunkelgelb nach Muster (I think thats yellow) was used.Was red oxide paint used? If anyone could enlighten me,it would be much appreciated.
Ps I am new to the forum and would like to say hello to everyone.
Lionel

Guido Wolff
Posts: 13
Joined: Fri Aug 31, 2007 6:38 pm

Post by Guido Wolff »

Hi Lionel,
at that time, first half of 1944, red-brown primer in RAL 8012 was most likely used. Over this basic coat Zimmerit was applied. Overall Dunkelgelb at the factory. Camouflage was applied by the Tiger units.
If you ship off Zimmerit keep in mind, that Zimmerit itself had the colour ocker (some kind of light yellow-brown).
Guido

Tim Bowman
Posts: 1762
Joined: Fri Jul 13, 2007 4:53 am
Location: Northern California
Been liked: 177 times
Contact:

Post by Tim Bowman »

Hi Lionel

It would probably depend on the severity of the damage. IE knocked off zimmerit from Artillery blast, collision etc. (exposing primer)or impact from a 75mm.(exposing primer and bare metal)

Like Guido describes, on my Panther, I painted red-oxide primer first then applied my zimmerit over that. Then Dark yellow and soon, camo. Hoping that if my zimmeit gets knocked it will expose the primer resembling somewhat the real look. Yet to be seen.

Just my 2 cents worth. Hope that helps. All the best

Tim
"So long as one isn't carrying one's head under one's arm, things aren't too bad." – Erwin Rommel

Lionel Champ
Posts: 67
Joined: Sat May 24, 2008 10:52 am
Location: Dartford,Kent
Been liked: 1 time

Post by Lionel Champ »

Thank you for the tips.It is definitely food for thought. I like the sound of collision damage with a hint of small arms fire. I don,t think that I am ready for shell damage. As Dale said,I can imagine that it is a bit scary taking chunks out of your pride and joy.
Lionel

Dale jordan
Posts: 1456
Joined: Fri Jul 13, 2007 1:10 am
Location: Port Macquarie Australia
Been liked: 514 times
Contact:

Post by Dale jordan »

Yesterday on my day off , I finished the shell damage to the mantel of my tiger I use a dremal then stippled on some car filler with a stiff brush . When the weathering is done this will be high lighted. Dale


Image

Dale jordan
Posts: 1456
Joined: Fri Jul 13, 2007 1:10 am
Location: Port Macquarie Australia
Been liked: 514 times
Contact:

Post by Dale jordan »

This is the other side


Image

Dale jordan
Posts: 1456
Joined: Fri Jul 13, 2007 1:10 am
Location: Port Macquarie Australia
Been liked: 514 times
Contact:

Post by Dale jordan »

This photo shows the car filler stippled over the shell damage and the small arms fire as well . Dale

Image

Post Reply