Page 1 of 1
Smoke Unit
Posted: Tue Nov 06, 2012 6:58 am
by Robert Meyer
Hello
I bought a smoke unit for my late model tiger and it didn't come with instructions. I have most of it figured out but I don't know where the MATTING goes. Can someone tell where the matting is installed.
Thanks
Bob
Re: Smoke Unit
Posted: Tue Nov 06, 2012 8:03 am
by John Fitzsimons
Contact Gill. She can email the instructions. It goes over the heating element but needs to be shaped.
Re: Smoke Unit
Posted: Tue Nov 06, 2012 6:08 pm
by Paul Fairlamb
Robert
Further to John's advice, it acts as a wick drawing fluid from the reservoir to the element. As John suggests it is shapped around the element tube, I secured mine with a stapler, it does not have to very tight because when all is assembled it has nowhere to go. Remember to orientate the free ends down.
The Armortek instructions say, "Form the matting into an omega shape around the heat tube and stable into place."
regards
Paul
Re: Smoke Unit
Posted: Tue Nov 06, 2012 9:30 pm
by Robert Meyer
Ok. I think I have it now. Thanks for the help.
Robert