The Official Armortek Forum - World leader in one sixth scale metal kits

Hi this is my first attempt at using forum.Nearly finished my first project of this type. Has anyone found the gap between drive sprockets is too narrow for the tracks. I have reversed the outer ones and packed them out with shims to widen the gap - not ideal as the inner recess ring in now on the outside.

Hello Jonathan

If I have understood correctly, I think you have put the rings on incorrectly. The recess on the ring should be on the outer face of the sprocket.

hello Jonathan

i think David is right . i have just tested a piece of track on a

sprocket and there is about 1mm clearance with the track

engaged on the sprocket

dave gray

Thanks Davids. Yes this will provide the right gap I am sure - it just didn't seem right.