I have noticed today when i tried to start the track that there was no wire in to attach the pins in
. Where do you get 1mm wire from 
Lee
Tracks
-
leesellars
- Posts: 934
- Joined: Thu Jul 12, 2007 11:19 am
- Location: Nottingham
- Has liked: 2 times
- Been liked: 15 times
Tracks
Hello Chaps
I have noticed today when i tried to start the track that there was no wire in to attach the pins in . Where do you get 1mm wire from
Lee
I have noticed today when i tried to start the track that there was no wire in to attach the pins in
. Where do you get 1mm wire from Lee
http://www.Facebook.com/newthorpemodels
Dont hit me so early in the morning with those negative waves.
Listen carefully i shall say this only once.
If its not broke dont fix it.
Ich Hatt Einen Kameraden
Dont hit me so early in the morning with those negative waves.
Listen carefully i shall say this only once.
If its not broke dont fix it.
Ich Hatt Einen Kameraden
-
phil fitzpatrick
- Posts: 2020
- Joined: Sat Dec 12, 2009 3:38 pm
- Location: Sambourne uk
- Been liked: 223 times
Re: Tracks
Hi Lee
I used the wire from B&Q in the Garden section,they sell it by the coil.
The Silver stuff though not the soft geen stuff.
I had 2 sizes in the garage one was about 1.3mm and the other was about
1.4mm.
They sell both sizes but I used the thinner one it was a perfect size.
Its stouter stuff than the green harder to bend so was just right.
I put some pic's on eraly on in my postings when I did mine.
Cheers
Phil
I used the wire from B&Q in the Garden section,they sell it by the coil.
The Silver stuff though not the soft geen stuff.
I had 2 sizes in the garage one was about 1.3mm and the other was about
1.4mm.
They sell both sizes but I used the thinner one it was a perfect size.
Its stouter stuff than the green harder to bend so was just right.
I put some pic's on eraly on in my postings when I did mine.
Cheers
Phil