The Official Armortek Forum - World leader in one sixth scale metal kits

Now i am starting a new project: I think one of the last Sturmtiger out of the box.
The first photos are from the hub caps and the sprockets with the rings. The next are coming.

Hi Martin
Years since there has been one of these on here.
Will be following the build with interest.

Regards Derek

Looking forward to this Martin, regards simon.

Really looking forward to following this build.

Robert T

Also looking forward to following

Prototype sturmtiger here
Cheers

Thank you guys for the warm welcome,
here are the next photos of the road wheels. On the last photos you can see, that the screw 2 and 4 of every 5 screws are soldered to simulate a screw and not a nut.

Nice work Martin I will do the same on my Late tiger and Sturm.

Cheers

What fine details, Martin.
Wonderful to follow this build.

Hi David,
hi Robert
thank you so much for your nice words. But i was to early with mounting the Aluminium sprocket rings from Armortek. In the meantime i ordered the beautiful tracks from Liam and his sprocket rings made of steel. The absolut best tracks for a Tiger 1 i ever saw!!!
So i had to dismount the alu rings and mounted again with the steel rings. Also the road wheels and the swing arms are ready and primed.

Agree with you martin 110%
Liam's late Tiger links are absolutely beautiful.
I have them on my Late Tiger also.

Martin the detail work on the road wheels was superb. The smaller m2.5 nuts on the hub look fantastic and the faux bolt heads look perfect, especially with the larger m2.5 rim nuts. Did you use m2.5 nuts from MVD? That was where I was going to source mine for my KT wheels.