The Official Armortek Forum - World leader in one sixth scale metal kits

Posted: **Mon Jul 12, 2021 5:20 pm**

Well, you know me and Panthers - NBTNGTTS

Adrian.

Posted: **Mon Jul 12, 2021 5:52 pm**

You have too many t shirts already!

Cheers

Posted: **Fri Jul 16, 2021 10:31 pm**

Hi,

Nothing to spectacular, ... doing the basics still takes alot of effort and time.

: Torsion bars installed, adjusted a few to match the other side.
Will be looking for around 90mm ground clearance when completed

: Ideler cleaned and bearings reinstalled

: Lock tabs and extra fastener added to make it a little more like the original

Cheers

Posted: **Sun Sep 19, 2021 9:35 pm**

A little more done

I must be getting lazier! I thought to myself shall I just build up the primer to hide the marks or erase them completely...who would know? The problem was I would.

: That's better cast texture still to be applied

: Width comparison with a tiger sprocket

: Battery tray and deck support back in

Cheers

Posted: **Sun Sep 19, 2021 10:12 pm**

I didn't realise the sprocket were so different in width.

And I think you may have the tray in backwards. Isn't the tab that sticks out for the smoker ?

Adrian.

Posted: **Sun Sep 19, 2021 10:29 pm**

Hi Adrian

The width is surprising as the track is not that much smaller

I did think the tray should be the other way around - but it only fits one way with the current hole position and I'm not drilling any new holes in the floor to turn.

Cheers

Posted: **Wed Sep 22, 2021 4:32 pm**

Real nice to follow you´r renovation off this Jagdpanther .
been a hell off work I´m sure but great inspiration also.
Some great work here and a lot off nice details you put in to it .

Posted: **Sun Apr 17, 2022 12:03 am**

Hi All,

Some more progress.

: Welds added to make it look like separate welded plates

: Steve Winstone starter plate and Jack

: Steve Winstone exhausts fitted

Regards
David

Posted: **Sun Apr 17, 2022 7:58 am**

Hello David!
Nice to see you back on the Jagdpanther.
The Jagdpanther looks good.
Regards Michael

Posted: **Sun Apr 17, 2022 8:16 am**

Yep it’s a looker alright.lovely work.

Posted: **Sat Apr 23, 2022 3:58 pm**

Hi All

Steve Winstone C shackles and holders fitted.
Has anyone got aftermarket access covers available, I remember a few being cast in the past.

: Anyone got any upgraded parts available

Thanks

Posted: **Sat Apr 23, 2022 4:43 pm**

Hi David
Have a word with Mark Lawson (Rivetcounter)
Regards
Steve

Posted: **Sat Apr 23, 2022 5:31 pm**

Thanks Steve, will reach out to him

Posted: **Sun Apr 24, 2022 7:08 pm**

Hi,

Steve Winstone rear bins and fighting compartment bin fitted.

Regards
David

Posted: **Mon Apr 25, 2022 6:01 pm**

Excellent details - really looking good. I need a set of those bins!
Bob

The Official Armortek Forum - World leader in one sixth scale metal kits

Jagdpanther no 13

Re: Jagdpanther no 13

Re: Jagdpanther no 13

Re: Jagdpanther no 13

Re: Jagdpanther no 13

Re: Jagdpanther no 13

Re: Jagdpanther no 13

Re: Jagdpanther no 13

Re: Jagdpanther no 13

Re: Jagdpanther no 13

Re: Jagdpanther no 13

Re: Jagdpanther no 13

Re: Jagdpanther no 13

Re: Jagdpanther no 13

Re: Jagdpanther no 13

Re: Jagdpanther no 13