Armortek

Posted: **Mon Oct 03, 2022 4:31 pm**

And the second hatch fitted, original holes tapped to m4 and plugged with a counter sunk fastener ...only a small amount of filling to complete.

Posted: **Sat Dec 10, 2022 7:35 pm**

Hi All

Mike Stannard air vent fitted today - on the left the original.

Regards
David

Posted: **Thu Feb 23, 2023 9:20 pm**

Hi David, been waiting very patiently for a build update on your Tiger.
Looking forward to some more updates soon.
Cheers
Tim

Posted: **Fri Feb 16, 2024 8:41 pm**

HI All,

Sorry for the wait Tim.

Some progress.

: Hatch opening on the 2007 Late tiger was to small to receive a Armorpax hatch, I increased the size with my dremel

: Mark Lawson vent fitted, I reduced the thickness a little

: Mike Stannard axe fitted along with some Steve Winstone parts , jacking block, C shackle brackets and light conduit.

: Some welds added, waiting to receive the top half of the fillet from John Fitzsimons

: Steve Winstone gun cleaning rods and tow cable brackets fitted

: Another late tiger restoration that I've been working on, lots of things fixed and parts added.

Posted: **Sun Feb 18, 2024 6:02 pm**

Hi All,

Front fillets counterbored and reshaped to look more like the original part, 4ba nuts used, and additional holes drilled to secure, these will be filled.

: Original part- counterbored to large

: Modified - position and size is better, I can now add a weld line in the correct position

Cheers

Armortek

DB Late tiger refurbish

Re: Late tiger refurbish

Re: Late tiger refurbish

Re: Late tiger refurbish

Re: Late tiger refurbish

Re: Late tiger refurbish