Page 8 of 22

Re: Chieftain No. 34

Posted: Sun Jun 06, 2021 8:50 pm
by Charles A Stewart
Good evening all(it's good, half term is over, here anyway).

Haven't done much this week, moved tanks around so that I can work on Chieftain's turret & Bailey Bridge. So here is today's work, eBay (other outlets available) leather, loaders hatch internal detail.

Right, here's a question, when a Chieftains barrel is fully elevated, does the counter weight foul the batteries?

Batteries x2 placed on a support directly under the centre point of the turret, convenient. However do the electronics provide a cut out at the end of the elevation /depression movement?

While I have the turret on the bench I have the barrel totally depressed (no John It is still a very happy barrel, just chillin')

I have some lead which I might use, again open to suggestions.

Keep safe, take care.

Charles
Loaders hatch 1.jpg

Re: Chieftain No. 34

Posted: Mon Jun 07, 2021 8:54 am
by John Clarke
Most annoyingly your doing a wonderful job Charles. I can only dream of having the turret on the bench. I'm still mixing house duties with garden duties and work duties. I do like the detail here, paying lip service to the edges of the hatch and turret.
The leather work is very nice too, having a eye on a old pair of the wife's gloves in the future.
While the barrels down did you get one of those very nice inserts from Phil. I was rifling around the other day in the parts box and came across it, and started day dreaming of the day when I could fit it. :D

Re: Chieftain No. 34

Posted: Mon Jun 07, 2021 9:50 am
by Richard Goodwin
John Clarke wrote:
Mon Jun 07, 2021 8:54 am
I was rifling around the other day in the parts box and came across it, and started day dreaming of the day when I could fit it. :D
Ditto, me too :P

Re: Chieftain No. 34

Posted: Mon Jun 07, 2021 12:33 pm
by Charles A Stewart
Good morning.
No I don't have an insert for the barrel, I email Adrian about one some time ago, no rush.

I must be the only one working from top down, that is me🙄.

Thinking of add ON's, is there anyone with a spare set on the stowage bin hasps they would like to sell?
Charles

Re: Chieftain No. 34

Posted: Mon Jun 07, 2021 1:44 pm
by John Clarke
Hi Charles
I'll have a few of the originals from Armortek you can have if that's what you mean. I'll need a few myself for the UC.

Re: Chieftain No. 34

Posted: Mon Jun 07, 2021 4:57 pm
by Charles A Stewart
Thanks for the offer John, I should have said padlock hasps, as sold by Steve Winstone, I missed out by not being quick enough. I did manage to acquire a couple of reflectors though, very nice.

Cheers Charles

Re: Chieftain No. 34

Posted: Mon Jun 07, 2021 10:04 pm
by John Clarke
No, Charles my mistake, I should have thought latches.
A man of your caliber could make them, no problem, ok ok, the slots might be a problem :cry:
There's not a lot to them, just eleven to make :cry: , it'd be just the time, certainly keep you off the streets for a while.
This is not a "rub it in" picture by the way, just a close up of the hasps from Steve. I could do measurements, Just in case you want to have a go at them.
He might still have some, have you asked?
SAM_3511.JPG

Re: Chieftain No. 34

Posted: Tue Jun 08, 2021 11:47 am
by andymusgrove
Hi John/Charles

Steve does not have any i have tried.... :(

but would appreciate the dims if you had the time please i will need to make some as well

Best

Andy

Re: Chieftain No. 34

Posted: Tue Jun 08, 2021 12:32 pm
by Richard Goodwin
If enough people need them, could be worth Steve doing another run? Just a thought!

Re: Chieftain No. 34

Posted: Tue Jun 08, 2021 12:47 pm
by andymusgrove
Hi Richard

Absoulutely worth a try, i will email him and ask whether thats an option and how many and lets see how we get on....

Cheers

Andy

Re: Chieftain No. 34

Posted: Tue Jun 08, 2021 1:18 pm
by andymusgrove
ok i have Emailed Steve - I'll let you know....

Re: Chieftain No. 34

Posted: Tue Jun 08, 2021 2:03 pm
by Charles A Stewart
Hi all

Thanks for your help here, if Steve chooses to produce them, count me in please.

Cheers Charles

Re: Chieftain No. 34

Posted: Tue Jun 08, 2021 7:01 pm
by John Clarke
Plan A is pretty good idea and makes sense. I hope Steve helps you guys out, he seems to come though in an hour of need with his wonderful stuff. I'm sure he'll always find a market for the working hasps. If not for the Chieftain, I'm sure there are other vehicles waiting in the aisle for this sort of detail.
But if not.
Plan B
SAM_3514.JPG
SAM_3514.JPG (112.6 KiB) Viewed 18139 times
SAM_3513.JPG
SAM_3513.JPG (116.36 KiB) Viewed 18139 times
SAM_3512.JPG
SAM_3512.JPG (147.82 KiB) Viewed 18139 times

Re: Chieftain No. 34

Posted: Tue Jun 08, 2021 8:23 pm
by Charles A Stewart
Evening John.
Thanks for dimensions post, most useful.

Many thanks

Charles

Re: Chieftain No. 34

Posted: Tue Jun 08, 2021 10:45 pm
by andymusgrove
Nice one John thanks for the dims much appreciated

Many thanks

Andy