- IMG_5020.jpg (125.45 KiB) Viewed 885 times
Fan Loom
-
Sean-Armortek
- Posts: 23
- Joined: Thu Oct 14, 2021 6:52 am
- Has liked: 9 times
- Been liked: 55 times
Re: Fan Loom
Hello Ed
That is not a connector, that is a MOSFET, please do not connect this to anything.
That is not a connector, that is a MOSFET, please do not connect this to anything.
-
Ed Groenenberg
- Posts: 163
- Joined: Tue Jul 20, 2021 1:46 pm
- Location: Bennekom, Netherlands
- Has liked: 96 times
- Been liked: 629 times
Re: Fan Loom
Hmm, you have to connect it, else it's useless 
The Mosfet is used to control the fan-speed of the smoke unit.
I know the cable is pretty long, so I rewired mine and mounted it on the plastic stand which hold the fan in place.
The Mosfet is used to control the fan-speed of the smoke unit.
I know the cable is pretty long, so I rewired mine and mounted it on the plastic stand which hold the fan in place.
You only live once., use it to the max!
-
David Merritt
- Posts: 64
- Joined: Tue Nov 10, 2020 12:14 pm
- Location: Surrey
- Has liked: 2 times
- Been liked: 46 times
Re: Fan Loom
Hi Ed,
What you show in the photo is the MOSFET which has 3 wires coming from it, the metal protruding from the heat shrink is the heat sink for the MOSFET to prevent it from overheating. This does not require fitting to anything but should be in a position so that it can shed heat.
What you show in the photo is the MOSFET which has 3 wires coming from it, the metal protruding from the heat shrink is the heat sink for the MOSFET to prevent it from overheating. This does not require fitting to anything but should be in a position so that it can shed heat.