Hi I am new to this forum, following it already some years, and finally purchased the series one kit. I am preparing the car for an animatronics based 1/6st figure (also my first try in the era of robotics). First adaptation to standard kit is moving steering wheel. It moves in parallel with the steering servo (unfortunately i cannot upload videos in the forum to show it working.
Also adapted gearstick movable fore-aft (will be moving by the animatronics arm of driver figure. Next challenge is to construct a moving accelerator paddle.
Series 1 nr 45 built for animatronics
-
Philip Capel
- Posts: 14
- Joined: Wed Jan 03, 2024 9:57 pm
- Has liked: 1 time
- Been liked: 31 times
Series 1 nr 45 built for animatronics
- Attachments
-
-
- Screenshot 2024-01-07 at 15.41.13.png (249.23 KiB) Viewed 3714 times
-
Charles A Stewart
- Posts: 559
- Joined: Sat Oct 05, 2019 7:26 pm
- Location: Cumbria
- Has liked: 493 times
- Been liked: 900 times
- Contact:
Re: Series 1 nr 45 built for animatronics
Good evening Philip.
Lovely to have you on board, at last someone else prepared to share their build of the S1.
I like do your idea of coordinated steering system, certainly will add realism. Looking forward to more robotics.
Take care.
Charles
Lovely to have you on board, at last someone else prepared to share their build of the S1.
I like do your idea of coordinated steering system, certainly will add realism. Looking forward to more robotics.
Take care.
Charles
Chieftain No.34, functional. PKW IV (2002), operational. Panther G No.18 (2022), started, well some of it is. Series 1 4x4 No.28 and a Bailey Bridge.
-
Tim Carr
- Posts: 187
- Joined: Sat Jun 08, 2019 4:43 am
- Has liked: 2118 times
- Been liked: 92 times
-
Philip Capel
- Posts: 14
- Joined: Wed Jan 03, 2024 9:57 pm
- Has liked: 1 time
- Been liked: 31 times
Re: Series 1 nr 45 built for animatronics
Did some work on moving steering wheel and accelerator paddle. RC test motor and steering :
Test RC sontrols
Test RC sontrols
-
mick whittingham
- Posts: 219
- Joined: Fri Sep 28, 2012 8:51 pm
- Location: Yorkshire UK
- Has liked: 10 times
- Been liked: 151 times
Re: Series 1 nr 45 built for animatronics
Ooh that's a bit too electronic tech for me Phil.
Good luck with the modifications.
Mine will just have to be ghost driven lol.
I'm planning on some extra detailing work and the like, I enjoy engineering as a hobby so it's a perfect fit between a model kit that takes out all the grunt work and being able to dabble with the details, kind of like Slartibartfarst enjoying "all the fiddly bits around the fjords."
Look forward to seeing you build develop alongside me.
Mick
Good luck with the modifications.
Mine will just have to be ghost driven lol.
I'm planning on some extra detailing work and the like, I enjoy engineering as a hobby so it's a perfect fit between a model kit that takes out all the grunt work and being able to dabble with the details, kind of like Slartibartfarst enjoying "all the fiddly bits around the fjords."
Look forward to seeing you build develop alongside me.
Mick
-
Philip Capel
- Posts: 14
- Joined: Wed Jan 03, 2024 9:57 pm
- Has liked: 1 time
- Been liked: 31 times
Re: Series 1 nr 45 built for animatronics
Worked on the driver a couple of days!
It Has 6 microservos for several fonctions
![Image]()
Short video with arm function.
It Has 6 microservos for several fonctions
Short video with arm function.
-
Philip Capel
- Posts: 14
- Joined: Wed Jan 03, 2024 9:57 pm
- Has liked: 1 time
- Been liked: 31 times
-
Philip Capel
- Posts: 14
- Joined: Wed Jan 03, 2024 9:57 pm
- Has liked: 1 time
- Been liked: 31 times
-
Philip Capel
- Posts: 14
- Joined: Wed Jan 03, 2024 9:57 pm
- Has liked: 1 time
- Been liked: 31 times
-
Philip Capel
- Posts: 14
- Joined: Wed Jan 03, 2024 9:57 pm
- Has liked: 1 time
- Been liked: 31 times
Re: Series 1 nr 45 built for animatronics
Whole weekend fabricating some brackets for the very large speaker, tight fit !![Image]()
- Attachments
-
-
Philip Capel
- Posts: 14
- Joined: Wed Jan 03, 2024 9:57 pm
- Has liked: 1 time
- Been liked: 31 times
Re: Series 1 nr 45 built for animatronics
Did some work to store electronics, lot of adaptations to do to have the standard electronic gear mounted:
- Attachments
-
-
Tom Wittstock
- Posts: 96
- Joined: Fri Sep 05, 2008 2:48 pm
- Location: United States/Michigan
- Been liked: 18 times
Re: Series 1 nr 45 built for animatronics
Philip, where did you get your animatronics figures from.......They look great and appear very well made....
-
Philip Capel
- Posts: 14
- Joined: Wed Jan 03, 2024 9:57 pm
- Has liked: 1 time
- Been liked: 31 times
Re: Series 1 nr 45 built for animatronics
This is the link to the guy who developed it. I bought the 3D print files. Asked someone to do the 3D printing https://www.youtube.com/channel/UC23Yry ... Dn3uKGMqlQTom Wittstock wrote: ↑Mon Mar 11, 2024 7:58 pmPhilip, where did you get your animatronics figures from.......They look great and appear very well made....
-
Philip Capel
- Posts: 14
- Joined: Wed Jan 03, 2024 9:57 pm
- Has liked: 1 time
- Been liked: 31 times