Wanted SdKfz 7 front sprocket
-
Brian Bush
- Posts: 2
- Joined: Wed Apr 26, 2023 10:17 am
-
Jerry Carducci
- Posts: 803
- Joined: Sun Apr 05, 2020 7:38 pm
- Location: California, If you plan to visit you'd better hurry while there's still something left!
- Has liked: 3 times
- Been liked: 1116 times
- Contact:
Re: Wanted SdKfz 7 front sprocket
I'm curious Bryan did one of your originals meet with an unfortunate end? Which version do you have, first or second type? The first
type, like my own is one piece and the rollers are held in with pins which are originally secured with adhesive of some sort. The second type has separate sprocket rings and the rollers have integral stub shafts that are retained by the steel sprocket rings upon assembly of the complete sprocket.
Jerry
type, like my own is one piece and the rollers are held in with pins which are originally secured with adhesive of some sort. The second type has separate sprocket rings and the rollers have integral stub shafts that are retained by the steel sprocket rings upon assembly of the complete sprocket.
Jerry
http://tanks.linite.com/ - RC tanks: stay home, build a tank and save a life!
-
Brian Bush
- Posts: 2
- Joined: Wed Apr 26, 2023 10:17 am
Re: Wanted SdKfz 7 front sprocket
Jerry, sorry for the delay in replying.
It is a one piece sprocket and yes unfortunately it has 3 teeth missing. It still runs but knowing it is damaged it has not had much running and I would like to get it sorted. I have now taken it off the model and one of our club members has kindly said he will have a look at it.
Brian
It is a one piece sprocket and yes unfortunately it has 3 teeth missing. It still runs but knowing it is damaged it has not had much running and I would like to get it sorted. I have now taken it off the model and one of our club members has kindly said he will have a look at it.
Brian