Panther G with a difference
-
- Posts: 1225
- Joined: Thu Jul 12, 2007 11:42 am
- Location: Manchester
- Has liked: 8 times
- Been liked: 688 times
Panther G with a difference
Just to add a bit of variety to the Panther G topics, here’s one I have been building as a commission.
It’s a old Universal hull version released a number of years ago.
The Panther came with both the G turret and a F turret plus’s a load of aftermarket parts .
The plan is to have the turrets interchangeable and as such I have decided to model the hull on the F version with revised front plate interlocks and a scid plate replacing the small idler wheel on the final drive. I have kept the G style drivers and radio operators hatches as there is no information on the replacement F style sliding hatches available (using up old stock G hatches is my excuse).
Regards
Steve
It’s a old Universal hull version released a number of years ago.
The Panther came with both the G turret and a F turret plus’s a load of aftermarket parts .
The plan is to have the turrets interchangeable and as such I have decided to model the hull on the F version with revised front plate interlocks and a scid plate replacing the small idler wheel on the final drive. I have kept the G style drivers and radio operators hatches as there is no information on the replacement F style sliding hatches available (using up old stock G hatches is my excuse).
Regards
Steve
-
- Posts: 718
- Joined: Tue May 14, 2013 9:14 pm
- Location: Solihull
- Has liked: 2490 times
- Been liked: 443 times
- Contact:
Re: Panther G with a difference
That's a very interesting build you have there Steve, I like the way you have done the F type hull interlocks.
Any ideas on a colour scheme.
Any ideas on a colour scheme.
-
- Posts: 287
- Joined: Tue Jun 22, 2010 8:09 pm
- Has liked: 232 times
- Been liked: 213 times
Re: Panther G with a difference
That looks fantastic! Can't wait to see it finished.
Cheers,
Alex
Cheers,
Alex
Armortek Hetzer no 31 (2022).
Quicquid agas age
-
- Posts: 1225
- Joined: Thu Jul 12, 2007 11:42 am
- Location: Manchester
- Has liked: 8 times
- Been liked: 688 times
Re: Panther G with a difference
Thanks Alex, just waiting for the upgraded wheels to finish it off.
Mark, going to do a 3 colour hard edged scheme unless plans change.
Regards
Steve
Mark, going to do a 3 colour hard edged scheme unless plans change.
Regards
Steve
-
- Posts: 71
- Joined: Wed Apr 27, 2022 4:08 am
- Location: Seoul, South Korea
- Has liked: 266 times
- Been liked: 128 times
Re: Panther G with a difference
Hi Steve,
Great detail and quality as always.
I particularily love the torch cut detail on turret. It seems that interlocked part of front glacis plate and side pannier different from recent one?
Once such detail on cutting surface is applied, it would be sad to cover those parts if do zimmerit coating .
Cheers,
Jae-seung
Great detail and quality as always.
I particularily love the torch cut detail on turret. It seems that interlocked part of front glacis plate and side pannier different from recent one?
Once such detail on cutting surface is applied, it would be sad to cover those parts if do zimmerit coating .
Cheers,
Jae-seung
- Robert E Morey
- Posts: 2295
- Joined: Wed Jul 18, 2007 12:59 am
- Location: Seattle, WA USA
- Has liked: 122 times
- Been liked: 753 times
Re: Panther G with a difference
Thats great Steve - I had forgotten about the F type turret. Wonder how many were made? I've only seen 2.
Always enjoy your Panther builds.
Bob
Always enjoy your Panther builds.
Bob
-
- Posts: 1225
- Joined: Thu Jul 12, 2007 11:42 am
- Location: Manchester
- Has liked: 8 times
- Been liked: 688 times
Re: Panther G with a difference
Hi Bob
I think there were 5 made but I may be wrong.
Jae-sung
No Zim on this one as it’s a very late war vehicle.
Regards
Steve
I think there were 5 made but I may be wrong.
Jae-sung
No Zim on this one as it’s a very late war vehicle.
Regards
Steve
-
- Posts: 1225
- Joined: Thu Jul 12, 2007 11:42 am
- Location: Manchester
- Has liked: 8 times
- Been liked: 688 times
- Tim Page
- Posts: 523
- Joined: Wed Dec 03, 2014 10:45 am
- Location: Milton Keynes
- Has liked: 40 times
- Been liked: 469 times
Re: Panther G with a difference
That is looking very sharp Steve.
That camo looks superb.
I thought all the 'F' hulls had crew heaters - that rear deck looks strange without one.
Tim
That camo looks superb.
I thought all the 'F' hulls had crew heaters - that rear deck looks strange without one.
Tim
2008 Armortek Panther ausf.G (early) #0035
2012 Armortek Tiger 1e (Late) #001
2009 Armortek BefehlsPanzer 111 ausf.J #0011 (SOLD)
2010 Armortek A34 Comet #0031 (SOLD)
2012 Armortek Tiger 1e (Late) #001
2009 Armortek BefehlsPanzer 111 ausf.J #0011 (SOLD)
2010 Armortek A34 Comet #0031 (SOLD)
-
- Posts: 71
- Joined: Wed Apr 27, 2022 4:08 am
- Location: Seoul, South Korea
- Has liked: 266 times
- Been liked: 128 times
Re: Panther G with a difference
This camo pattern looks good with interesting colour scheme! is it one of the existing camo pattern and colour that Panther division has applied during WW2? I love this!
Cheers
Jae-seung
Cheers
Jae-seung
-
- Posts: 1225
- Joined: Thu Jul 12, 2007 11:42 am
- Location: Manchester
- Has liked: 8 times
- Been liked: 688 times
Re: Panther G with a difference
Tim
Late war, anything goes
Jae-Seung
There is a F turret as well as a G turret for this kit so I have gone for a bit of a “what-if” scheme.
Regards
Steve
Late war, anything goes
Jae-Seung
There is a F turret as well as a G turret for this kit so I have gone for a bit of a “what-if” scheme.
Regards
Steve
-
- Posts: 4268
- Joined: Mon Mar 01, 2010 4:48 pm
- Location: Cornwall
- Has liked: 2259 times
- Been liked: 7147 times
Re: Panther G with a difference
Very nicely done as usual Steve!
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.