DMD unit

Matthijs Dijkstra · Post by **Matthijs Dijkstra** » Mon Sep 10, 2007 9:46 pm

Hi guys,

Can somebody send me a drawing or a scheme how to convert a Tamiya DMD Unit to 12 Volt?

Thanks very much.

Matthijs

pantzer6@yahoo.com

Allan Richards · Post by **Allan Richards** » Wed Sep 19, 2007 11:03 am

Matthijs

From what I understand the units work on 12v DC quite happily. The only mod I've seen is the use of cooling fans on the FET's when driving 600 motors!!!. This is what Armorpax did when the converted their 21st century Stuart's.

Matthijs Dijkstra · Post by **Matthijs Dijkstra** » Fri Sep 21, 2007 9:37 pm

Thanks Allan!

B.g.

Matthijs

Allan Richards · Post by **Allan Richards** » Mon Sep 24, 2007 9:33 am

Matthijs

Before you go down this route I would contact Dave Dibbley at Armorpax just to be sure that is what he did. The DMD units are expensive things to blow up.

Robert Bruce · Post by **Robert Bruce** » Mon Sep 24, 2007 4:58 pm

I personally errr'd on the side of caution and powered the DMD with a 7.2v race pack, it lasts forever and no fear of killing it

Matthijs Dijkstra · Post by **Matthijs Dijkstra** » Mon Sep 24, 2007 9:21 pm

Thanks guys! You're a great help

B.g.

Matthijs