Advice to make weld seam

Dirk Schweinsberg · Post by **Dirk Schweinsberg** » Thu Jan 29, 2009 9:49 am

Hi Guys,

I need some advice from you experts in how to make scale weld seams.
Is there anybody who can tell me the way to do ...

Thanks a lot ....Dirk

Kent Wiik · Post by **Kent Wiik** » Thu Jan 29, 2009 10:57 am

Hi Dirk

In Roland Manns gallery you can see one way to make them:
http://www.armortek.co.uk/gallery/main. ... temId=5311

Hope this helps
Kent

Tim Bowman · Post by **Tim Bowman** » Thu Jan 29, 2009 3:49 pm

Hi Dirk

Here is a very good tutorial by another master, Dave Dibb, using the same teqnuqie as Roland. I hope it's OK that I post this link here.

http://www.armorpax.com/Armorpax/Forum/ ... c.php?t=77

Also, Dale's Sherman and Tiger builds have some of the cleanest welds I've seen using auto-body filler(seen here).

http://www.armortek.co.uk/forum/viewtopic.php?t=961

regards
Tim

leesellars · Post by **leesellars** » Thu Jan 29, 2009 7:50 pm

Hello Dirk

The product to use is modeling putty Milliput. Then it just practice.

Lee