Well, it's been a bad year on the personal front (they don't teach 'Dealing with aged and dying parents 101' at school so you have to make it up on the fly when the time comes

) so progress on my Quad hasn't gone nearly as quickly as I intended. But, as seems to be the way with these things, it finally came together in a rush this week

. So here's the (pretty well) finished result:
It's a bit different to the one I got from Phil Woollard ! (see his 'Me Quad' thread for comparisons). The main change, of course, is the colour. Post-War British vehicles were painted in BS224 Deep Bronze Green. And, before anyone says "Ahh, but wouldn't they have just been War Surplus ?" well, yes, but the History of 45RA clearly says that they were
completely refurbished before shipping to Korea. So I'm happy with it. But the paint quality up to about 1956 was rubbish, due to post-War shortages of pigments and oils, which caused enough runs and patches to give an RSM a heart attack. So I'm quite happy to have used rattle cans, and say that any imperfections are 'historically accurate' ! Well, that's my story and I'm sticking to it .....
The markings are all my own - I find that a very satisfying part of the build. The Unit Sign for the 29th Infantry Brigade was a white ring on a black square, known to the irreverent British Squaddie as the 'frozen a***hole' (Colonial friends may delete one of the asterisks

). The number plate is in the right format, but reflects the number of the kit.
Phil's electrics were very technical and very confusing, so I replaced them with the standard Armortek MCM which is a lot simpler. I did, however, keep his lovely model engine under the hinged bonnet, and even got the fan working on one of the proportional channels. That'll make for a good diorama with the crew gathered around the open bonnet arguing about why the engine won't start ......
And then, of course, there's all the 'Gucci' to add.
Dave Dibb (Armorpax) helpfully provided all the bits I didn't have, and lovely things they are too. This model really does cry out for the extras - fuel cans in holders, windscreen wipers, springs, wing mirrors ...... and I added
Steve Winstone's superb reflectors. They should probably be painted green, but the brass looks too nice to cover up !
And a few bits of my own. Opening up the roof hatch is a simple job, and it doesn't take much work to give the underneath a bit of detail. The roof cover and the rolled-up radiator blanket were made by my lovely wife. I'm ridiculously proud of the bridging disk, which I made from a flat disk with a loop of wire glued around the edge and then rounded over with Milliput to get the 'dished' effect'.
The crew (four of them, plus an officer) required a bit of kit-bashing. The winter of 1950-51 was bitterly cold in Korea (as the US Marine Corps found out at the Chosin Reservoir) and, true to form, the British decided it would 'all be over by Christmas' so the troops didn't have any cold weather gear. Fortunately the Americans had plenty of it, and were eager to trade, the medium of exchange being ...... whiskey ! So that's why they look a bit 'Yank', apart from the Officer, who has the good old 'British Warm' overcoat. The three in the back are a bit hidden away, though, so I may well use them for a future project of a similar nature where they'll be somewhat more obvious

.
So that's basically it. I'm very pleased with the changes, and the opportunity to model a largely forgotten part of 20th Century military history. Driving it is something I'm getting used to - using a Futaba 7C (this model doesn't require anything super-sophisticated) left stick is forward / back, and I managed to configure the right stick so that right is actually right, and left is actually left. Even the steering wheel turns the right way. A rotary encoder was already fitted (thanks,
Steve Stuart !) so I can easily play all the sounds.
If I can make a suitable transportation system (ie. something to stop it rolling around in the back of the car) I hope it take it to the Bovington Model Show next weekend.
The limber is almost finished - hopefully this week, to give me something to tow around. The 25-pdr needs a bit more work. But I also have a second limber - 1/3 of an Artillery Regiment towed two limbers (but no gun) in order to maintain ammunition stocks. That should also be something different for displays.
All the best,
Chris