hi all
Anybody by chance have a picture of how to wire connect the MG flash cables to a Benedini Mini.
there are 2 wires Plus & Minus to the MG LED - how does these 2 connect to the output 1+2 on the benedini mini
Would it be Minus at the buttom and the Plus on top leaving the middle pin free or?
Benedini Mini and MG flash
-
Steen Vøler
- Posts: 770
- Joined: Mon Nov 19, 2012 2:45 pm
- Location: Denmark
- Has liked: 62 times
- Been liked: 498 times
-
Adrian Harris
- Posts: 5074
- Joined: Thu Jul 12, 2007 10:46 pm
- Location: Berkshire (UK)
- Has liked: 1420 times
- Been liked: 1595 times
Re: Benedini Mini and MG flash
http://benedini.de/TBSMini_13_E.pdf
If it has been configured, it should be between the middle and top pins of "OUT 1+2",with the middle going to the anode (+ve) and the top going to the cathode (-ve).
Middle and bottom of "OUT 1+2" should be the trigger signal for the main gun recoil.
Adrian.
If it has been configured, it should be between the middle and top pins of "OUT 1+2",with the middle going to the anode (+ve) and the top going to the cathode (-ve).
Middle and bottom of "OUT 1+2" should be the trigger signal for the main gun recoil.
Adrian.
Contact me at sales@armortekaddict.uk for details of my smoker fan control module
-
Steen Vøler
- Posts: 770
- Joined: Mon Nov 19, 2012 2:45 pm
- Location: Denmark
- Has liked: 62 times
- Been liked: 498 times
(again) Adrian