Novice Late Tiger Build.

[Glen Clark]

I've been putting wheels together,I've got some more priming and painting to do again.I may just leave in bare metal until I've done my trial run of the lower hull.

IMG_20190310_3650.jpg (104.48 KiB) Viewed 2501 times

IMG_20190310_53323.jpg (92.9 KiB) Viewed 2501 times

Jut got to put the other 8 pairs together now.


Glen.

[Glen Clark]

I got a couple of the Armorpax hatches put together and primed.I am more than likely going to use the Armortek hinges although I haven't unpacked them yet so I'm not sure how much fettling will be needed.

IMG_20190312_11736.jpg (76.52 KiB) Viewed 2452 times

IMG_20190312_41429.jpg (69.04 KiB) Viewed 2452 times

IMG_20190312_31617.jpg (74.23 KiB) Viewed 2452 times

I am going to try my hand at weathering the inside of these hatches with weld rust and polished wear on the handles.Ive not done weathering be for so I can't be sure of the end result.


Glen.

[Vince Cutajar]

Love those hatches. Just out of curiosity, are the locks functional?

Vince

[Glen Clark]

No Vince they are not functional.but they do look good once they are painted.I believe that the hatches are painted the some colour as the outside of the Tank....So Dunkelgelb then.





Glen.

[Glen Clark]

It kind of breaks my heart making something all new and shiny look old and rusty...

IMG_20190314_1136.jpg (77.22 KiB) Viewed 2390 times

IMG_20190314_42678.jpg (77.09 KiB) Viewed 2390 times

IMG_20190314_26642.jpg (73.28 KiB) Viewed 2390 times

IMG_20190314_12386.jpg (59.25 KiB) Viewed 2390 times

But needs must,I'm trying to under-weather it rather than over do it.Ill keep looking at it and make my mind up if I'm happy with it.


Glen.

[Glen Clark]

Resistance was futile,I couldn't wait to see a couple of wheels with camo on them.To say I'm disappointed is an understatement.I used Ral 8017,brown and Ral 7017 green.The green is looks very grey to me.The brown is too red,I'm happy with the Dunkelgelb so I'll stick with that.

I'm looking at Tiger 222 Normandy.

IMG_20190317_45464.jpg (53.36 KiB) Viewed 2322 times

The paint was only a quick go to see if my expectations exceeded my skills so it's no great loss.The Dunkelgelb went on a bit dry so I was intending to flat it and respray.

IMG_20190317_28942.jpg (47.9 KiB) Viewed 2322 times

IMG_20190317_59417.jpg (46.35 KiB) Viewed 2322 times

IMG_20190317_44948.jpg (45.19 KiB) Viewed 2322 times

Anybody give me any paint advice for colours suitable for airbrushing?

Thanks.

Glen.

[Vince Cutajar]

Airbrushing: something I need to learn.

Vince

[Stephen White]

Vince - Knowledge Base Topic on starting airbrushing here:

http://www.armortek.co.uk/Forum3b/viewt ... bfd63705f5

[Brian Ostlind]

Looks nice Glen

[Stephen White]

Glen

The three view you've used is an artist's impression, so I wouldn't treat it as gospel truth. By 1944, Tigers in Normandy would have used the following colours:

RAL 7028 Dunkelgelb (note that the last of the four Dunkelgelbs, RAL 7028 Ausgabe 1944 didn't come in until October, so you need the earlier one)
RAL 6003 Olivgruen
RAL8017 Rotbraun

Note that the RAL colour chart used during the war does not necessarily translate into the chart used today, so you can't directly read across.

The only source of true colour matches are the original colour chips. You can see them here:

https://www.historycolors.de

There are also reproductions of the chips in the Chory book and in the AK Real Colours book. (the references are in my thread on Dunkelgelb).

These will give you an idea:

image2.jpg (47.37 KiB) Viewed 2259 times

As for paint for airbrushing, Vallejo and Tamiya colours are not very accurate but spray well. The AK Real Colours aren't. The best options are either the new Hataka range or Xtracrylix available through Hannants in UK.

Hope that helps. For what it's worth (and of course it's difficult to tell on a computer screen), the colours you've sprayed look pretty accurate.

Stephen

[Glen Clark]

Thank you Stephen,I'm sort of getting the idea that the colours are infinitely variable,so with that in mind ill look for the colours that suit me.

I realise that just the Dunkelgelb has around 10 or more different shades.

I never realised that choosing the colours for a Tank would be such a headache The 3 colour pic you sent looks good enough for me so ill try to match them.


Regards Glen.

[Stephen White]

Sounds like a good plan, Greg. The colours are "infinitely variable" in at least two ways, we all perceive colours in different ways and the process of printing/photographing also introduces variation. Then you also have the effects of ageing and weathering. Finally, paints, particularly Wehrmacht ones, were applied both in the factory and in the field by crews. The latter introduced more variation. That's why people who get really hung up on colour are chasing their tails.

That said, the only definitive colour guides are original, contemporary colour chips. For Wehrmacht colours, it's a real pity that they're not more widely accessible. Just to correct one thing, Dunkelgelb went through 4 changes, not 10 or more, so. the problem is manageable. My thread sets it all out in tedious detail.....

http://www.armortek.co.uk/Forum3b/viewt ... 21fb8eddd7

It's not so much of a headache if you know what you're looking for and know which manufacturer's colours are reliable.

Stephen

[Glen Clark]

I'm happier with the Green,not sure if this is the combo I will go with.Its just a quick blow over the Gray to see how it looked.

IMG_20190319_11694.jpg (53.11 KiB) Viewed 2204 times

IMG_20190317_59417.jpg (46.35 KiB) Viewed 2204 times

IMG_20190319_19815.jpg (54.76 KiB) Viewed 2204 times

8a717a336726a9e611b9f3b77c4ede95.png (245.71 KiB) Viewed 2199 times

This is another picture of Tiger 222 in Normandy.


Glen.

[mark lawson]

the new green that you have used looks a lot more accurate than the older grey looking colour, RAL6003 Olivgruen or olive green also has a number of shades depending on factory who supplied the paint, year how it was thinned weather etc.

[Glen Clark]

It's a minefield Mark,My philosophy is if it looks right then that will do for me whatever the colour code is.It seem that whichever colour you use it will be wrong to somebody.I don't mind as long as it looks ok .




Glen.