CHALLENGER 2 PRE-ORDERS
OPEN ON THE 6TH FEB 2025


KT Loaders Hatch and other additions

Armortek owners can buy and sell 1/6 scale accessories and detail parts. note: Armortek does not necessarily endorse these products and can accept no liability for contractual disputes
Post Reply
Dave Dibb (Armorpax)
Posts: 1158
Joined: Thu Jul 12, 2007 6:03 pm
Location: Hampshire
Has liked: 116 times
Been liked: 1106 times
Contact:
Contact Dave Dibb (Armorpax)

KT Loaders Hatch and other additions

Post by Dave Dibb (Armorpax) »

Hi All,

We have added one or two new additions to Armorpax in the last 2 weeks,

The first is our new daughter Alice Mae so my apologies if our service is not as fast as usual over the next few weeks but some things are just more important than work :wink:

The second is the 40mm thk Loaders Hatch used on the King Tiger (also used on some late Tiger 1's) and the masters are pictured below. These are going off to our caster this week and should be available fairly soon.

Best regards

Dave

Image
Image
Image
www.armorpax.net

There used to be a nice banner here till Photobucket lost everything.............................
Top
Tim Bowman
Posts: 1762
Joined: Fri Jul 13, 2007 4:53 am
Location: Northern California
Been liked: 177 times
Contact:
Contact Tim Bowman

Post by Tim Bowman »

Hi Dave

Outstanding looking loaders hatch Dave! No surprise there. Congratulations again on your daughter Alice Mae. Very cool

kind regards

Tim
"So long as one isn't carrying one's head under one's arm, things aren't too bad." – Erwin Rommel
Top
Allan Richards
Posts: 743
Joined: Thu Jul 12, 2007 10:34 am
Location: Kent
Been liked: 10 times

Post by Allan Richards »

Dave,

Congratulations on the arrival of your daughter. Her arrival doesn't seem to have slowed you too much!!!
Allan Richards
Top
User avatar
Adrian Harris
Posts: 5074
Joined: Thu Jul 12, 2007 10:46 pm
Location: Berkshire (UK)
Has liked: 1420 times
Been liked: 1595 times

Post by Adrian Harris »

Congratulations on your daughter - I would guess she's about 1/6th scale at present :?: :D :D

Alice was my maternal grandmother's name - it's nice to see it's back in fashion :)

Adrian.
Top
Jim Slothower
Posts: 138
Joined: Wed Apr 02, 2008 7:39 pm
Location: (Afghanistan)-Camas, Wa. USA

Post by Jim Slothower »

Dave,

Congratulations on your daughter. Mine turns 2 next week and I miss her like crazy, dont waste a minute with her.

Jim
Top
Post Reply

Return to “Craftsman's Market”