Armorpax PAK 40 build
-
- Posts: 1158
- Joined: Thu Jul 12, 2007 6:03 pm
- Location: Hampshire
- Has liked: 115 times
- Been liked: 1104 times
- Contact:
Armorpax PAK 40 build
Hi All,
With the shows pretty well over now and the decks clear of orders for a few days I have managed to make a start on the PAK 40
Best regards
Dave
With the shows pretty well over now and the decks clear of orders for a few days I have managed to make a start on the PAK 40
Best regards
Dave
www.armorpax.net
There used to be a nice banner here till Photobucket lost everything.............................
There used to be a nice banner here till Photobucket lost everything.............................
-
- Posts: 1158
- Joined: Thu Jul 12, 2007 6:03 pm
- Location: Hampshire
- Has liked: 115 times
- Been liked: 1104 times
- Contact:
Re: Armorpax PAK 40 build
Hi All,
I have removed the main part of the breech handle and this will be replaced with a more scale dummy section, I am using the same key and slot in the breech handle shaft as I did on the PAK 43 to allow the breech to be fully spun open. I have also added the wheel hooks.
Best regards
Dave
I have removed the main part of the breech handle and this will be replaced with a more scale dummy section, I am using the same key and slot in the breech handle shaft as I did on the PAK 43 to allow the breech to be fully spun open. I have also added the wheel hooks.
Best regards
Dave
www.armorpax.net
There used to be a nice banner here till Photobucket lost everything.............................
There used to be a nice banner here till Photobucket lost everything.............................
-
- Posts: 1158
- Joined: Thu Jul 12, 2007 6:03 pm
- Location: Hampshire
- Has liked: 115 times
- Been liked: 1104 times
- Contact:
Re: Armorpax PAK 40 build
Hi All,
More done, not sure if I can but going to try and get all the master parts ready for the open day.
Best regards
Dave
More done, not sure if I can but going to try and get all the master parts ready for the open day.
Best regards
Dave
www.armorpax.net
There used to be a nice banner here till Photobucket lost everything.............................
There used to be a nice banner here till Photobucket lost everything.............................
-
- Posts: 1158
- Joined: Thu Jul 12, 2007 6:03 pm
- Location: Hampshire
- Has liked: 115 times
- Been liked: 1104 times
- Contact:
Re: Armorpax PAK 40 build
Hi All,
More progress on the masters and build.
Best regards
Dave
More progress on the masters and build.
Best regards
Dave
www.armorpax.net
There used to be a nice banner here till Photobucket lost everything.............................
There used to be a nice banner here till Photobucket lost everything.............................
-
- Posts: 1158
- Joined: Thu Jul 12, 2007 6:03 pm
- Location: Hampshire
- Has liked: 115 times
- Been liked: 1104 times
- Contact:
Re: Armorpax PAK 40 build
Hi All,
Last bit for today,
Best regards
Dave
Last bit for today,
Best regards
Dave
www.armorpax.net
There used to be a nice banner here till Photobucket lost everything.............................
There used to be a nice banner here till Photobucket lost everything.............................
-
- Posts: 584
- Joined: Mon Oct 09, 2017 9:49 pm
- Has liked: 97 times
- Been liked: 446 times
Re: Armorpax PAK 40 build
I have a PAK40 kit waiting in the wings... and your pictures are great inspiration!
Cheers and thanks for posting.
RP
Cheers and thanks for posting.
RP
-
- Posts: 50
- Joined: Thu Aug 24, 2017 11:02 am
- Been liked: 22 times
Re: Armorpax PAK 40 build
Hi Dave
Are you able to provide an update on when you are likely to be able to ship these sets?
Please count me as a definite order.
Many thanks.
Dave J
Are you able to provide an update on when you are likely to be able to ship these sets?
Please count me as a definite order.
Many thanks.
Dave J
-
- Posts: 1158
- Joined: Thu Jul 12, 2007 6:03 pm
- Location: Hampshire
- Has liked: 115 times
- Been liked: 1104 times
- Contact:
Re: Armorpax PAK 40 build
Hi All,
Resin moulds are all done and ready and my metal casters expect to have the first test shots to me in the next couple of weeks. We will then be able to advise cost and lead time but not far off
Best regards
Dave
Resin moulds are all done and ready and my metal casters expect to have the first test shots to me in the next couple of weeks. We will then be able to advise cost and lead time but not far off
Best regards
Dave
www.armorpax.net
There used to be a nice banner here till Photobucket lost everything.............................
There used to be a nice banner here till Photobucket lost everything.............................
-
- Posts: 1158
- Joined: Thu Jul 12, 2007 6:03 pm
- Location: Hampshire
- Has liked: 115 times
- Been liked: 1104 times
- Contact:
Re: Armorpax PAK 40 build
Hi All,
Happy New Year.
Courtesy of Rivet (Werkstatt-5) or Mark as some know him we have PAK 40 round masters inbound to go with the release of the PAK 40 update set this month. As soon as they arrive I'll get moulds made and details out. If I get time this week I'll also add the new metal parts to the PAK 40 so its ready for primer and paint.
Best regards
Dave
Happy New Year.
Courtesy of Rivet (Werkstatt-5) or Mark as some know him we have PAK 40 round masters inbound to go with the release of the PAK 40 update set this month. As soon as they arrive I'll get moulds made and details out. If I get time this week I'll also add the new metal parts to the PAK 40 so its ready for primer and paint.
Best regards
Dave
www.armorpax.net
There used to be a nice banner here till Photobucket lost everything.............................
There used to be a nice banner here till Photobucket lost everything.............................
-
- Posts: 1158
- Joined: Thu Jul 12, 2007 6:03 pm
- Location: Hampshire
- Has liked: 115 times
- Been liked: 1104 times
- Contact:
Re: Armorpax PAK 40 build
Hi All,
The PAK 40 is finished and ready for painting. I've replaced most of the resin development parts with the new metal pieces but the odd one's I haven't from the new set are shown in the last pic of the sets.
Best regards
Dave
The PAK 40 is finished and ready for painting. I've replaced most of the resin development parts with the new metal pieces but the odd one's I haven't from the new set are shown in the last pic of the sets.
Best regards
Dave
www.armorpax.net
There used to be a nice banner here till Photobucket lost everything.............................
There used to be a nice banner here till Photobucket lost everything.............................
-
- Posts: 1158
- Joined: Thu Jul 12, 2007 6:03 pm
- Location: Hampshire
- Has liked: 115 times
- Been liked: 1104 times
- Contact:
Re: Armorpax PAK 40 build
www.armorpax.net
There used to be a nice banner here till Photobucket lost everything.............................
There used to be a nice banner here till Photobucket lost everything.............................
-
- Posts: 1158
- Joined: Thu Jul 12, 2007 6:03 pm
- Location: Hampshire
- Has liked: 115 times
- Been liked: 1104 times
- Contact:
Re: Armorpax PAK 40 build
www.armorpax.net
There used to be a nice banner here till Photobucket lost everything.............................
There used to be a nice banner here till Photobucket lost everything.............................
-
- Posts: 1158
- Joined: Thu Jul 12, 2007 6:03 pm
- Location: Hampshire
- Has liked: 115 times
- Been liked: 1104 times
- Contact:
Re: Armorpax PAK 40 build
www.armorpax.net
There used to be a nice banner here till Photobucket lost everything.............................
There used to be a nice banner here till Photobucket lost everything.............................
-
- Posts: 584
- Joined: Mon Oct 09, 2017 9:49 pm
- Has liked: 97 times
- Been liked: 446 times
Re: Armorpax PAK 40 build
I just put in my order for the Armorpax detail set for the Pak40! Looking forward to it! I've been putting Dave's stuff on my limber and it's first rate. Turns a great kit into something really special!
Cheers,
RPR
Cheers,
RPR