long the GUN Pipe from the Panzer IV in 1/6
-
Heiko Sattler
- Posts: 235
- Joined: Mon Aug 18, 2014 11:00 am
- Has liked: 2 times
- Been liked: 535 times
-
Heiko Sattler
- Posts: 235
- Joined: Mon Aug 18, 2014 11:00 am
- Has liked: 2 times
- Been liked: 535 times
Re: long the GUN Pipe from the Panzer IV in 1/6
Help me
which is really bad in this forum. all read only but no one writes
which is really bad in this forum. all read only but no one writes
-
Uwe Gerstenmayer
- Posts: 222
- Joined: Wed Feb 13, 2013 7:57 pm
- Location: Cologne Area, Germany
- Has liked: 2 times
- Been liked: 65 times
Re: long the GUN Pipe from the Panzer IV in 1/6
Hello Heiko,
I'm sure the ones with Panzer 4 are looking and will reply once the detail has been clarified
I don't have that model, but what I can offer is to have a look at the Bovington Tank Museum.
I'll be there for TankMod 2016 on Oct.08 and if they have one, I'll figure out for you !
cheers from Cologne,
Uwe
I'm sure the ones with Panzer 4 are looking and will reply once the detail has been clarified
I don't have that model, but what I can offer is to have a look at the Bovington Tank Museum.
I'll be there for TankMod 2016 on Oct.08 and if they have one, I'll figure out for you !
cheers from Cologne,
Uwe
1:16 Models: Kingtiger
1:10 Models: Flak-Panther Coelian, Panther A , S.WS with 3,7cm Flak 37
1:6 Armortek Models: Flak 36 2006, Kingtiger 2013, PAK 43/41 2015, SdKfz 251 2016, FAMO 2018
1:6 other Models: Opel Blitz , Kübelwagen , Zündapp KS750 etc...
1:10 Models: Flak-Panther Coelian, Panther A , S.WS with 3,7cm Flak 37
1:6 Armortek Models: Flak 36 2006, Kingtiger 2013, PAK 43/41 2015, SdKfz 251 2016, FAMO 2018
1:6 other Models: Opel Blitz , Kübelwagen , Zündapp KS750 etc...
-
Adrian Harris
- Posts: 5073
- Joined: Thu Jul 12, 2007 10:46 pm
- Location: Berkshire (UK)
- Has liked: 1419 times
- Been liked: 1594 times
Re: long the GUN Pipe from the Panzer IV in 1/6
According to the plans for the original Armortek Panzer IV, the overall length of the barrel, part number CD0429, should be 388mm.
The cylindrical section which fits into the gun tube at the turret end is 100mm long and 25mm in diameter. The tapered section from the gun tube to the muzzle brake is 288mm long.
The muzzle brake, part number CD0430, is 67mm from end to end.
The two together would be 288mm + 67mm, so 355mm in total.
Adrian.
The cylindrical section which fits into the gun tube at the turret end is 100mm long and 25mm in diameter. The tapered section from the gun tube to the muzzle brake is 288mm long.
The muzzle brake, part number CD0430, is 67mm from end to end.
The two together would be 288mm + 67mm, so 355mm in total.
Adrian.
Contact me at sales@armortekaddict.uk for details of my smoker fan control module