Two stick to one stick control

John Hill · Post by **John Hill** » Thu Sep 17, 2015 3:38 pm

Hi, I am running my comet on a Futaba 7c and have just converted to one stick control, using the elevon mix function. Tracks 1&2 are on channels 1&2 and the mix is 50/50.
X axis on the joystick controls one track and Y axis controls the other, so in order to go full speed ahead the stick is at 2 o'clock And full reverse is 7 o'clock ,, is this correct ?

Regards John

Adrian Harris · Post by **Adrian Harris** » Thu Sep 17, 2015 4:00 pm

In a word, no

It should be:

12 o'clock full speed forwards.

6 o'clock full speed backwards.

3 o'clock turn on the spot clockwise.

9 o'clock turn on the spot anti-clockwise.

Adrian.

Adrian Harris · Post by **Adrian Harris** » Thu Sep 17, 2015 7:14 pm

Sorry, that was somewhat terse - I was just about to join a conference call.

The thread here:

http://www.armortek.co.uk/Forum3b/viewt ... von#p29769

Says to use 100% for each side, -7% Diff and then use the trims to make sure the tank moves in a straight line when the stick is at 12 o'clock.

Adrian.

John Hill · Post by **John Hill** » Thu Sep 17, 2015 7:30 pm

Thanks ADRIAN, I will try that tomorrow , I did wonder about the percentage of mix.

Thanks again John

dennypatterson · Post by **dennypatterson** » Thu Sep 17, 2015 7:49 pm

No your not terse , just get to the point!!!!!!!! and on to next problem. such as me ..... denny.p.s all mine are one stick .

Adrian Harris · Post by **Adrian Harris** » Fri Sep 18, 2015 10:55 am

>p.s all mine are one stick

But the wrong side

Adrian.

Dennis Jones · Post by **Dennis Jones** » Tue Sep 22, 2015 10:45 am

Tell me about it Adrian, had to change the mode to mode 3 to get it to work !!!

Dennis.

dennypatterson · Post by **dennypatterson** » Tue Sep 22, 2015 2:45 pm

At least it gives you lot something to talk about....!!!!p.s I wonder if I should get Dennis to change it around to suit Adrian,,,denny..

Steve Stuart · Post by **Steve Stuart** » Tue Sep 22, 2015 8:33 pm

If Mark and Dennis have time on the Saturday a master class on one stick programming can be had?
The issue is that there is going to be an unofficial parallel World Record attempt on the greatest number of Tanks that can be repaired by one person in one day. With Adrian and Dennis going head to head for the title.

Steve

Dennis Jones · Post by **Dennis Jones** » Wed Sep 23, 2015 11:02 am

I think we would have to share the title and don't forget Chris Fry he's done his fair share in the past.

Dennis.

dennypatterson · Post by **dennypatterson** » Wed Sep 23, 2015 5:55 pm

Steve, a good idea, my 3 men i,.m sure would love to sort my lot out, 2 electronic masterminds, and one formula 1 techician. !!!!!!! only it would take more than a day....... I can only hope. denny

Two stick to one stick control

Two stick to one stick control

Re: Two stick to one stick control

Re: Two stick to one stick control

Re: Two stick to one stick control

Re: Two stick to one stick control

Re: Two stick to one stick control

Re: Two stick to one stick control

Re: Two stick to one stick control

Re: Two stick to one stick control

Re: Two stick to one stick control

Re: Two stick to one stick control