
King tiger Elevation problem
-
- Posts: 22
- Joined: Tue Jul 02, 2013 5:44 am
- Location: East Sussex
- Been liked: 1 time
King tiger Elevation problem
Can any body help,my elevation motor will only wind the gun down if I push the stick on my Futaba T7C in both directions ,it worked ok when I bench tested it.The only thing I have carried out since the bench test is adding the recoil package?.I have tried it by removing the recoil but it still will only go in one direction.Has anybody got any idears. 

Gary Sullivan
- Adrian Harris
- Posts: 5119
- Joined: Thu Jul 12, 2007 10:46 pm
- Location: Berkshire (UK)
- Has liked: 1475 times
- Been liked: 1674 times
Re: King tiger Elevation problem
I can't say I'm an expert in the elevation system but that sounds to me like one of the limit switches is stuck - or there's a problem with the wiring to it.
Do you have a meter you could use to test out which contacts are open and which are closed ?
Adrian.
Do you have a meter you could use to test out which contacts are open and which are closed ?
Adrian.
Contact me at sales@armortekaddict.uk for details of my smoker fan control module