2025 ARMORTEK KIT SURVEY

Over the last few years we have brought out a whole series of kits as a direct result of your feedback - kits like the Pershing, JagdPanther, Hetzer, Leopard 2A4, and more recently the Sd Kfz 7, 88mm Flak 36 and the upcoming Challenger 2.

So, in keeping with what has become and annual tradition, here is your opportunity to once again influence our future production plans.

We have added in some "guide pricing" next to the names of the models. This is a rough estimate of the price at the current rates.

Thanks in advance for your input and we look forward to the results.

25 pounder field gun spares

Armortek owners can buy and sell 1/6 scale accessories and detail parts. note: Armortek does not necessarily endorse these products and can accept no liability for contractual disputes
Post Reply
Terryaidanclarke
Posts: 9
Joined: Fri Feb 14, 2014 11:13 pm

25 pounder field gun spares

Post by Terryaidanclarke »

Hi all, can anybody tell me where I can get spare copper rivets, I also need EJ0205 sight lever and EJ0115 cradle. I'm afraid I've had the Grandkids around !!!. :cry:
Top
Bryan Brown
Posts: 59
Joined: Fri Oct 04, 2013 6:06 pm
Has liked: 403 times
Been liked: 9 times

Re: 25 pounder field gun spares

Post by Bryan Brown »

Have you tried Gill at Armortek always very helpful when I have dealt with Armortek
Top
John Fitzsimons
Posts: 1861
Joined: Tue Dec 14, 2010 3:11 pm
Location: IRELAND,Dublin/Meath
Has liked: 6 times
Been liked: 797 times
Contact:
Contact John Fitzsimons

Re: 25 pounder field gun spares

Post by John Fitzsimons »

Ekp supplies have copper rivets. Think they are 1/16. Kit inventory will confirm.
Also try maccmodels.co.uk
Top
Marcus Kwa
Posts: 176
Joined: Wed Nov 13, 2013 6:22 pm
Been liked: 39 times

Re: 25 pounder field gun spares

Post by Marcus Kwa »

Hi Terry,
I have used a smaller size rivet for my build, so I have the original ones gathering dust on my desk! I also have a spare cradle, it was sent by Armortek since I had an issue with the gun tube not being in the centre of the gun shield cut-out. The cradle was however identical to the one I had and the gunshield appeared to be the problem!!!
So cradle and rivets are available! PM me!

Regards,

Marcus
Top
Post Reply

Return to “Craftsman's Market”