My Jagd
-
- Posts: 33
- Joined: Sat Nov 03, 2012 8:40 pm
- Location: "South Front of Ruhrkessel" Siegen West Germany
- Been liked: 3 times
My Jagd
i post here my new project, the J.P. the model is by in Nov. last Year, and i work on the interior.
The new and the old Jagd:
Most important for me is the instalation of the pipe-return system, an powewrfull Sound system, a few specials in combination with the new Beier Sund Unit USM RC2. A very nice Soundunit, its very flexible and have very much functions. The price speaks for it self.
Ok her a some Photos from the Jagd:
The new front Plate
everything cleared out:
An Armortek wheel and an wolgorgrad jagd wheel, the tires to small.:
Dietrich weber and i have for the panther and the Jagdpanther an return pipe system bulid!.
In combination with an Power servo, the beier RC2 and an small special self made electronic work this unit. The orig. Armortek Parts had to be changed:
the remote orig. parts.:
the linear bearings:
the new parts:
the small engine collision with the right big engine, ther is a new Plate:
Ok, and here a funny movie from the mechanics, the electronik for fast back and slowly forward is not connectet, because of the language makes it quiet:
http://www.youtube.com/watch?v=_dqCc6-E ... sfbrtJ51TA
<iframe width="560" height="315" src="h ... ></iframe>
the powerfull sound system :
the orig. Armortek "black box" or distribution plate i have removed:
This is my self distribution Box: one Sound 12Volts circle, one 24Volts engine circle from driving accu, one 12Volts small engine circle from driving accu. Its not so fine, but its functionality:
it fills up:
the self made smoke unit with the exhaust pipe and new Flammvernichter:
???? this cables??
it comes soon...
greetings olaf
The new and the old Jagd:
Most important for me is the instalation of the pipe-return system, an powewrfull Sound system, a few specials in combination with the new Beier Sund Unit USM RC2. A very nice Soundunit, its very flexible and have very much functions. The price speaks for it self.
Ok her a some Photos from the Jagd:
The new front Plate
everything cleared out:
An Armortek wheel and an wolgorgrad jagd wheel, the tires to small.:
Dietrich weber and i have for the panther and the Jagdpanther an return pipe system bulid!.
In combination with an Power servo, the beier RC2 and an small special self made electronic work this unit. The orig. Armortek Parts had to be changed:
the remote orig. parts.:
the linear bearings:
the new parts:
the small engine collision with the right big engine, ther is a new Plate:
Ok, and here a funny movie from the mechanics, the electronik for fast back and slowly forward is not connectet, because of the language makes it quiet:
http://www.youtube.com/watch?v=_dqCc6-E ... sfbrtJ51TA
<iframe width="560" height="315" src="h ... ></iframe>
the powerfull sound system :
the orig. Armortek "black box" or distribution plate i have removed:
This is my self distribution Box: one Sound 12Volts circle, one 24Volts engine circle from driving accu, one 12Volts small engine circle from driving accu. Its not so fine, but its functionality:
it fills up:
the self made smoke unit with the exhaust pipe and new Flammvernichter:
???? this cables??
it comes soon...
greetings olaf
-
- Posts: 75
- Joined: Wed Oct 12, 2011 10:37 pm
- Location: Town of Pied Piper ( Hameln)
- Been liked: 3 times
-
- Posts: 33
- Joined: Sat Nov 03, 2012 8:40 pm
- Location: "South Front of Ruhrkessel" Siegen West Germany
- Been liked: 3 times
Re: My Jagd
Ok, here is the movie from work of the last 2 month.
Its time for the firefighter...
http://www.youtube.com/watch?v=GI1uWGXz ... sfbrtJ51TA
Its time for the firefighter...
http://www.youtube.com/watch?v=GI1uWGXz ... sfbrtJ51TA
-
- Posts: 2024
- Joined: Fri Nov 02, 2007 8:51 pm
- Location: new forest,hampshire,u.k.
- Been liked: 1633 times
Re: My Jagd
greetings olaf, those exhausts are the best thing i've seen for a long time on these models, very effective, and we will all want some! superb! regards simon manning.
-
- Posts: 547
- Joined: Fri Aug 28, 2009 10:08 pm
- Location: South Wales Glamorgan
Re: My Jagd
Hello Olaf
I have just seen your last vidio film of your jag panther and it is looking very nice and i must say i realy liked the exhaust light show it is very very good ,such a good idea and it looks great ,please keep more videos coming .thanks for posting .
best regards ,,,,,,,,,,,,,,,,,,nick
I have just seen your last vidio film of your jag panther and it is looking very nice and i must say i realy liked the exhaust light show it is very very good ,such a good idea and it looks great ,please keep more videos coming .thanks for posting .
best regards ,,,,,,,,,,,,,,,,,,nick
-
- Site Admin
- Posts: 3110
- Joined: Sat Oct 11, 2008 7:05 pm
- Location: Dorset
- Has liked: 1023 times
- Been liked: 2093 times
- Contact:
Re: My Jagd
Olaf - thanks for sharing your great build. The information on the Beier system is interesting, I've had a look at their website and the instructions. The exhausts are quite amazing - but I thought the Auspuff Flammenvernichteren were supposed to vernichten the Flammen! Back to the drawing board.
Regards
Stephen
Regards
Stephen
-
- Posts: 33
- Joined: Sat Nov 03, 2012 8:40 pm
- Location: "South Front of Ruhrkessel" Siegen West Germany
- Been liked: 3 times
Re: My Jagd
thanks everyone for the flowers...
The Fire is very big, but in the sun you dont see it! I drive the most time on Day.
yes there is also a small audience joke...
For the Kingtiger Exhaust Pipe is it safe better.
regards Olaf
The Fire is very big, but in the sun you dont see it! I drive the most time on Day.
yes there is also a small audience joke...
For the Kingtiger Exhaust Pipe is it safe better.
regards Olaf
-
- Posts: 1197
- Joined: Thu Dec 15, 2011 4:29 pm
- Has liked: 1564 times
- Been liked: 835 times
Re: My Jagd
Brilliant work Olaf..... I hope to have a recoil in my Jagd'. Excellent model....well done, best wishes, Mick
-
- Posts: 33
- Joined: Sat Nov 03, 2012 8:40 pm
- Location: "South Front of Ruhrkessel" Siegen West Germany
- Been liked: 3 times
Re: My Jagd
ok, here is an Update from my Recoil Maingun in Action, and the livting an slower Sound, the maingun rotate sound of hydraulics.
And The movable "Knochensäge" MG34
look here:
http://youtu.be/OqzzgcgDzic
And The movable "Knochensäge" MG34
look here:
http://youtu.be/OqzzgcgDzic
- Steen Vøler
- Posts: 770
- Joined: Mon Nov 19, 2012 2:45 pm
- Location: Denmark
- Has liked: 62 times
- Been liked: 498 times
-
- Posts: 33
- Joined: Sat Nov 03, 2012 8:40 pm
- Location: "South Front of Ruhrkessel" Siegen West Germany
- Been liked: 3 times
Re: My Jagd
Hey all,
a lot of Time goes into the land and now comes the Paint Job on my Jagd!
The inerieur is finished, and the mashine works...
The next Pictures show the Progress, I am not yet ready.
I have make an Salt chipping:
The Primer is dark Panzer Grey:
and now the ground Colour RAL7028 Dunkelgelb (darkyellow) from militärlacke.de:
The tires and the other Parts:
and now the new salt for the next Colourlayer:
here is my selfmade Paint Scheme :
and here the first steps from Colour painting with the other Colours 8017 and 6003:
This Picture is without the Saltlayer /chipping and with a small layer with the Groundcolour 7028 Dunkelgelb (misted):
Ok, and now comes the real Work!:
http://i1325.photobucket.com/albums/u63 ... e8c2c3.jpg
more soon, regards Olaf
a lot of Time goes into the land and now comes the Paint Job on my Jagd!
The inerieur is finished, and the mashine works...
The next Pictures show the Progress, I am not yet ready.
I have make an Salt chipping:
The Primer is dark Panzer Grey:
and now the ground Colour RAL7028 Dunkelgelb (darkyellow) from militärlacke.de:
The tires and the other Parts:
and now the new salt for the next Colourlayer:
here is my selfmade Paint Scheme :
and here the first steps from Colour painting with the other Colours 8017 and 6003:
This Picture is without the Saltlayer /chipping and with a small layer with the Groundcolour 7028 Dunkelgelb (misted):
Ok, and now comes the real Work!:
http://i1325.photobucket.com/albums/u63 ... e8c2c3.jpg
more soon, regards Olaf
-
- Posts: 164
- Joined: Tue Aug 23, 2011 10:01 pm
- Has liked: 1 time
- Been liked: 19 times
Re: My Jagd
Hello Olaf,
very nice outfit and the effect with the salt is super.
very nice outfit and the effect with the salt is super.
Have fun building, Kind regards
Christian
Christian
-
- Posts: 33
- Joined: Sat Nov 03, 2012 8:40 pm
- Location: "South Front of Ruhrkessel" Siegen West Germany
- Been liked: 3 times
Re: My Jagd
Hello togehther,
i;ve have a Question to the Panther and Jagdpanther Chain, can you help me?
its very difficult in english for but i hope you understand me. The Chain of the next Pictures are reared in different directions. It is not clear waht is right? Waht is the best direction for us Model? I have an idea, but its right?... see the pictures and you understand it:
the first Picture is the Chain too down, the second Picture is the Chain to up!!!!
in the Armortek manual is the Chain to down. look here:
The problem: wenn the Chain is mounted "up" you can have this Problem on the small brigde. on the Chain Eye is the broken bridge, see here:
when the chain is mounted "down" is the Chain Eye in the other direction and there are a bigger bridge, Ok?
see here:
the sprocket press now presses on the thick bridge Type.
this is chain "down"!!!!
here are the Photo from a drwing of Panther Chain.
once more, Japa Chain up:!
Panther, Chain down??!:
Ok, can you say me waht is the right direction??? or is all ok?
regards Olaf
i;ve have a Question to the Panther and Jagdpanther Chain, can you help me?
its very difficult in english for but i hope you understand me. The Chain of the next Pictures are reared in different directions. It is not clear waht is right? Waht is the best direction for us Model? I have an idea, but its right?... see the pictures and you understand it:
the first Picture is the Chain too down, the second Picture is the Chain to up!!!!
in the Armortek manual is the Chain to down. look here:
The problem: wenn the Chain is mounted "up" you can have this Problem on the small brigde. on the Chain Eye is the broken bridge, see here:
when the chain is mounted "down" is the Chain Eye in the other direction and there are a bigger bridge, Ok?
see here:
the sprocket press now presses on the thick bridge Type.
this is chain "down"!!!!
here are the Photo from a drwing of Panther Chain.
once more, Japa Chain up:!
Panther, Chain down??!:
Ok, can you say me waht is the right direction??? or is all ok?
regards Olaf
-
- Posts: 425
- Joined: Sat Dec 04, 2010 11:18 am
- Location: Northern Sweden
- Has liked: 6 times
- Been liked: 194 times
Re: My Jagd
Hi Olaf,
Impressing JP you have there in the making, very well done!
Regarding the track chevrons...yes this is confusing.
The links always seems to be reversed on Early JP:s and not that often on Later ones.
There is a rumour they had the tracks that way as bailing out from an Ambush the manual said they was to go in full reverse always expose the thick front to the enemy and therefore in need for good grip for the tracks.
Well this has never been verified in any document and I say is just a myth.
No the real case was that Miag that made the early JP:s had no experience making Panthers as MNH and DB had who from Nov 1944 also begun making JP:s
Miag simply made a mistake, no big deal as the links work as good reversed as when assembled correct.
To make matters more complicated the Armortek links are made with the chevron up side down...
No big deal and I suggest you do as I and make your JP with the chevrons the correct way and when they are worn out (as they will) reverse the tracks.
Kind regards
Kent
Impressing JP you have there in the making, very well done!
Regarding the track chevrons...yes this is confusing.
The links always seems to be reversed on Early JP:s and not that often on Later ones.
There is a rumour they had the tracks that way as bailing out from an Ambush the manual said they was to go in full reverse always expose the thick front to the enemy and therefore in need for good grip for the tracks.
Well this has never been verified in any document and I say is just a myth.
No the real case was that Miag that made the early JP:s had no experience making Panthers as MNH and DB had who from Nov 1944 also begun making JP:s
Miag simply made a mistake, no big deal as the links work as good reversed as when assembled correct.
To make matters more complicated the Armortek links are made with the chevron up side down...
No big deal and I suggest you do as I and make your JP with the chevrons the correct way and when they are worn out (as they will) reverse the tracks.
Kind regards
Kent
It´s all in the details!
- Robert E Morey
- Posts: 2295
- Joined: Wed Jul 18, 2007 12:59 am
- Location: Seattle, WA USA
- Has liked: 123 times
- Been liked: 754 times
Re: My Jagd
Olaf,
Beautiful work on your JP, esp the painting. The rolled effect on the armor is impressive. The salt chipping effect is amazing, looks very real. Perhaps you have discovered the masters (Simon) paint chip technique? Or created a new standard! Either way, this is going to be a great looking model. Thanks again for sharing.
Best regards,
Bob
Beautiful work on your JP, esp the painting. The rolled effect on the armor is impressive. The salt chipping effect is amazing, looks very real. Perhaps you have discovered the masters (Simon) paint chip technique? Or created a new standard! Either way, this is going to be a great looking model. Thanks again for sharing.
Best regards,
Bob